Its not only about rotor, Core losses of every machine which has core are fixed and only vary with Voltage variation.
Reducing core losses is a design responsibility of the manufacturer. They do this by laminating the core (to reduce eddy-current losses) and carefully selecting the type of material used for the core (to reduce hysteresis losses). There's very little that you, as the user, can do about reducing core losses.
Just like a transformer, the core losses are a combination of eddy current losses and hysteresis losses.
No, the purpose of laminating the core is to reduceeddy-current losses.
Whenever rotor cuts the magnetic field, emf is induced it. Due to this emf, some current may flow in the rotor. This current is called Eddy current which is unnecessary and considered a loss called Eddy current loss. When a magnetic material is energised it follows B-H curve and when de-energised, it does not follow B-H curve. This difference is considered a loss called Hysterisis loss.
Hysteresis and eddy current loss constitute core loss. It can be reduced by replacing solid core by laminated core... by adeeb
Core losses are losses in the magnetic system of the transformer, such as eddy currents in the core, hysteresis losses, etc. Because of this, the losses are constant, regardless of load, assuming voltage and frequency stay fixed.
in a dc machine core losses occur both in stator and rortor but stator core losses are negligible as compared to rotor core losses because in stator constant dc flux is given and the statot conductor is stationary so there are no eddy losses and as the flux is stationary there are no hysteresis loassses also but in rotor armature winding is placed so here alternating field is induced which cuts the rortating conductors of rotor thereby inducing eddy as well as hysteresis losses fo any more info. contact zombie
A three phase induction machine have the Following losses:- 1. Stator core loss 2.Stator Ohmic loss 3.Rotor core loss 4.Rotor ohmic loss 5.Friction losses 6.windage losses 7.Stray losses 8.Also it'll depends upon the types of motor as if it is a slip ring type IM then it will have sparking losses at slip contact etc etc which are very small in comparison to above losses. Regards,,
I fixed my toilet with a rotor.
separation of core losses are necessary to determine core losses at diffrent frequency.........
There are various measures that can be taken to reduce core losses. Lamination of the transformer core is believed to reduce core losses significantly.
Reducing core losses is a design responsibility of the manufacturer. They do this by laminating the core (to reduce eddy-current losses) and carefully selecting the type of material used for the core (to reduce hysteresis losses). There's very little that you, as the user, can do about reducing core losses.
The core loses occur because of the stator and rortor.
Core loss is one of the many fixed losses in a transformer. This means that no matter the loading of the transformer there this loss would be fixed unlike copper loss which depends on the loading of the transformer.
I am so sorry for your core losses
Iron losses are termed as core losses. There are mainly two losses - Copper loss and iron loss. Iron loss is no load loss.
Just like a transformer, the core losses are a combination of eddy current losses and hysteresis losses.