The 'lite' is for thin coats and final coat. The 'low dust' is for people who don't like dust and in general it's to give people a choice.
You use scrap pieces of drywall and joint compound.
There are a few ways that you can repair a large drywall section. One way is to use a patching compound and apply it over the area that needs to be repaired. Another way is to use a drywall adhesive to attach a piece of drywall over the area that needs to be repaired. Cut a piece of drywall to fit the hole. Attach the drywall to the studs with drywall screws. Cover the seams with drywall tape. Cover the entire patch with joint compound. Let the joint compound dry. Sand the joint compound. Paint the patch. For getting the professional drywall patch repair service contact us.
This could be caused by the drywall being damp. But you also shouldn't have any spackling compound there, - it should be drywall mud.
A compound.
Hello! Just a couple of guesses as to why the drywall compound is coming off the drywall while you are attempting to prime: First, is the compound totally cured; that is, is it hard and dry? Second, are you using a primer that is specifically designed for new drywall? Lastly, maybe too much paint, or even overworking the paint could saturate the compound, turning it back into a wet goop.
50 feet
no, asbestos is outlawed in the united states
Drywall mud is the thick, goopy white stuff you use to fill the seams between boards.
Sentence according to structure are: simple, compound, complex and compound-complex.
compound
a compound
There is no drywall glue. -If you are referring to mud (drywall compound), you scrape the lumps off at the end of each day and then wash your clothes. It always comes off.