0
Why are wires with high resistance used in light bulbs and toasters?
Wiki User
∙ 13y ago
High resistance wires convert the energy used, into heat. That makes the toaster heat up or the light to turn on.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Why are wires with high resistance used in light and toasters?
High resistance wires convert the energy used, into heat. That makes the toaster heat up or the light to turn on.
Do toasters work because of the heating effect of an electric current?
Yes. resistance in wires within the toaster causes those wires to become very hot.
How do you light up all the lights in mission 6?
u just need to connect the wires with the power box and connect light bulbs and wires together to light up all the lights
Why light bulbs should not be put into bottle banks?
Because light bulbs are not bottles. Light bulbs are attached to their metal parts, and some are hazardous waste . because they: • contain metals / filaments / wires • contain other / toxic chemicals / materials • different type of glass
Can a 120V chandelier be hard-wired to a 240V power source in Europe using 240V bulbs and will the wires handle the load?
as long as the total WATTAGE of the bulbs is the same, you should get the same light and the wires will handle the load just fine.
How do you change the headlight bulbs in a 2007 Chevy Impala Lt?
you will probably have to loosen the complete light assembly so you can get you hand in back of the light to change the bulbs, once you can get to them unplug the wires to the bulb and then either pull or twist the bulb out.
How do you replace tail light bulbs in 2005 Nissan Pathfinder?
lift open rear door, unscrew two screws, pull out light assembly straight back, but not to far because wires for light bulbs does not extend long. take your time ,simple job.
Compared to thin wires electrical resistance in thick wires are?
The electrical resistance in thick wires is less than thin.
92 S-10 brake lights work but tail light running lights won't work any troubleshooting ideas?
Try changing light bulbs check fuses, test light switch, look for broken wires or loose wires.
How do you change the backup light bulbs on a 1986 Pontiac Trans Am?
pop the rear door. remove spare tire cover. you'll see large turning knows to unscrew the whole tail light section. the bulbs have wires leading to them. turn and remove the socket. replace bulbs. easy!
Does the inside of a toaster have chemical energy?
No, assuming that by "chemical energy" you mean "chemical reaction." Toasters use resistance heaters (i.e. relatively thin wires carrying electricity) to impart radiation to the contents. This allows for almost infinite reuse.
How could Nikola Tesla light up light bulbs while holding them and having no electrical wires attached?
He conducted electricity wirelessly using the Tesla Coil.
