You cant read the old files because ME and XP are two different operating systems. An operating system is the system a computer uses to read and receive information. With out and operating system you wouldn't even be able to turn on your computer. The best thing you can do is to see if you can convert your data. A computer service center might be able to help you. In the future I suggest you pick and operating system that will be around for a while. Like XP yes they now have Vista but XP was the lastest version for almost seven years.
AnswerThink about it?Windows ME .vs Windows XP
First thing...
1. Two totally different OS's 2. The .dll's are no were need the same 3. XP is a true OS, unlike ME which is nothing but a enhancement to Windows 98
The only way your ME drive is going to work as a slave to a OS is if you use Windows 98, I cannot see it working with Windows XP at all.
AnswerPut the windows ME drive in a hard drive enclosure, which turns it into a USB external drive.Then you can read any file that is on the drive.
You can get them at www.newegg.com real reasonable.
keyword "sabrent"
Configure the hard drive as the master and the CD-ROM as the slave.
Hard drive as master and DVD writer as slave.
the hard drive should be set to master...
There are jumpers on the drive itself that can be configured to set it up as a master or a slave. Refer to your hard drive's documentation for the pins to use for these configurations.
Hard Drive configuration is used to define the Slave and master Hard Drive. When we are attaching more than one hard drive the configuration is used. Configuration is done by jumper setting which is available in back side of hard drive...1st two pins for master hard drive and last pins are slave..
IF the CD drive shares an IDE channel with a hard drive, make the hard drive the master and the CD drive the slave.
The Harddrive needs to be set as "master" and the CD ROM as Slave.
If you add an additional HD to your computer, the second drive becomes the slave drive because the computer must boot from the Master drive
first Hard drive is Master and additional will be set to slave.
Master and Slave configuration is necessary for motherboard in order to choose right disk to boot from.
It is using the EIDE connection. The book says that if you have a hard drive and a CD that the hard drive should be the master and the CD will be the slave.
master if the ide cable has a single drive connection. if the ide cable has the master and slave connection. then set the drive to master with slave.