0
Why crossover configuration of unshielded twisted-pair UTP for Ethernet cable is needed in connecting 2 PCs through Ethernet interface?
Rijaalu
It is needed because you need to reverse the signals of a transmit line to a receive signal line. This is what network connectivity devices do, such as hubs, switches, etc. If you aren't using a connection device then the cable has to do that job.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the 7.3 diesel crossover pipe?
The crossover pipes on a 7.3 ford diesel engine are the pipes connecting the exhaust manifolds to the turbo compressor inlet.
What patch cable is normally used for connecting hubs?
Unless your hub has a switchable port, you use a crossover cable.
What are some benefits that Insuristacom travel agency cover?
When connecting two devices which situation would normally require the use of a crossover.
How can two switches be connected?
Traditionally, two switches can be connected together with a crossover cable. A crossover cable should be used whenever two of the same network devices need to be connected together. e.g. Connecting a router to another router, a switch to another switch or a PC to another PC. Using a crossover cable is not always necessary however. Most new network devices include a feature named Auto-MDIX (Medium Dependant Interface Crossover). Auto-MDIX detects what type of cable is connected and automatically changes its own configuration to enable data transmission to the other device. i.e. It does not matter if you use a straight through cable or crossover cable on Auto-MDIX enabled devices. Both will work.
What cables do you need for backing up a routers IOS and the configuration file to a TFTP server?
A crossover cable. Some call them console cables.
Why should you use straight cable when connecting two different devices?
Same device----> crossover cable Different device->Straight through cable
For Ethenet networking crossover cords can connect two PCs directly without any intermediate network equipment?
Connecting two PCs directly using a crossover cable will enable them communicate without using any intermediate network equipment. The connection will work since a crossover cable has TX (Transmitting) and RX (Receiving) terminals that allow direct communication.
When to use crossover and straight through?
when you are connecting same devices like computer to computer or switch to switch or router to router to use cross over cable. when you are connecting different devices like computer to switch or computer to router to use straight cable.
What are some general rules to help you determine which type of Ethernet cable (straight-through or crossover) to use to connect different types of network hosts and devices?
When connecting two computers, use cross-over. Cross-over is required to connect the transmit and receive terminals of the two endpoints. When connecting through a router, switch or hub, use straight-through. The router, switch or hub provides the crossover.
What is a crossover cable?
It's a type of computer cable where some of the strands inside are "crossed over" compared to a "straight through" cable. You only need a crossover cable if you are connecting a computer directly to another computer. If you are connecting a computer to any other device like a switch, or a router, then you use a straight through cable, which are easier to find and cheaper. You can google for a crossover cable and it will show you a picture of which pins are crossed over.
What would you use a crossover cable for?
To connect two devices of the same type together. e.g. You would use a crossover cable to connect a router to another router, a switch to another switch or a computer to another computer. If you are connecting diferent devices together, such as a router to a switch, a straight through cable should be used.
What is the main difference between crossover games for mac and regular crossover for mac because couldn't you run games in regular crossover for mac?
Crossover Games only lets you play games. Regular Crossover lets you run applications. Crossover Pro lets you run both.
