Bad switch or a short and tripped the breaker.
Power is consumed whenever a load is connected to the distribution supply panel.The load is usually controlled by a switch, contactors for motors or breakers located in the distribution panel. Load on line power is consumed, load off line no power is consumed.
The line supply connects to the top terminals of the switch and the load connects to the bottom terminals of the switch.
we know that graphite(pencil lead)conducts electricity.a line drawn by the pencil contains graphite particles.then why can't it conduct electricity?
Easy, paint the exposed part the color of your choice. Hard, call a pro and have him/her install the desired colored switch....pkazsr Paint it.
To switch lines at school when a teacher lines you up, it is probably a good idea to first ask permission to switch lines. If you keep getting caught trying to switch lines, you will need to stay in your own line until the teacher lets you switch.
When the engine is running in your car the pressure of the oil activates a switch that is fitted along the oil line. this switch turns of a light that would otherwise be on on the dash of your car whenever the ignition is turned on. If your oil pressure goes down because you are low on oil or because your oil pump is not working properly the light on the dash turn on intermittently or stays on.
THe telegraph key is a switch. Tapping it closes a circuit and send a pulse of electricity down the line. These taps are used to code messages.
Check the pump first.
yea its legal. as long as its in an easily accessable spot. like in the middle of the dash or something along that line.
Electricity.
High tension line so a stronger wire for more electricity to run through
There is never a switch installed in a neutral line.
Only if you leave the burners or elements on. -If water stops, close gas line or switch off breaker for tank.
they mean a closed yard
There's a high pressure switch on the power steering line that activates when the steering wheel is turned all the way in any direction. This activates the AC compressor, which raises the RPM's. If the switch is not working, then the vehicle could stall.
The AC low and high pressure switch is located in a housing unit near the battery. It is along the edge of the drivers side of the engine bay in a metal refrigerant line.
On the ac line along the firewall.On the ac line along the firewall.