You may have a bulb that is burnt out, also check the fuse just in case. there is also a turn siganal flasher that's in with the fuse, if it has gone bad the hazords will not blink nor will the turn signal. It will just light up an not blink.
Often, a separate flasher unit is used to activate the hazard flashers. This unit might be bad, or the switch to activate the hazard flashers might be bad. answer always there are 2 flashers.one for turn signals other for hazard replace hazard flasher They have separate fuses also.
Try turning the hazard flashers on and off a couple times, see if that starts your signal lights working. If so, replace the hazard switch/module.
it is the relay, change it, it is the hazard button, the one with the red triangle.
There are two different flashers on vehicles. 1 for the turn signals, 1 for the hazard flashers.
Make sure the 4 way hazard switch is COMPLETELY off, if it is slightly depressed the turn signals will not work.
hazards and turn signals have separate flashers. replace flasher for turn signals
Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher you need to replace the blinker flasher unit it is different from the hazard unit they cost about 4 bucks the flasher unit is the big round thing in the fuse panel in the dashboard
There are two flashers, one for the hazards and one for the signals.
The flasher relay is more than likely defective. One flasher controls both the turn signals and the hazard lights. It is located on the driver side, behind dash, mounted above kick panel.
yes
Probably turn signal flasher
Your turn signals and hazards use separate flashers. Your hazard flasher might have bitten the dust. FriPilot sounds like the horn/horns arent working. also sounds like the hazard switch is inop