most of the time it is a time problem(coating to soon)cant say for sure but you can e mail
the engineer at acessa paints,great guy and all the right answers
Yes, with a special enamel used for that purpose. ------------------------------ Yes, it is best left to a professional to paint it electrostatically with epoxy enamel (or other) paint. They do it in your home without having to move the tub. It not expensive.
It will not last very long. Much better to use a full enamel spray or an epoxy base.
I wouldn't. I would try to get the first one to cure somehow, possibly by warming that area.
Yes, you can.
Yes, but it may not stay on very well. Besides, epoxy paints are very hard and wear resistant, while latex paints aren't. If the epoxy paint was needed the first time, repainting with something much less durable might not be such a wise move.
You can definitely use latex paint over epoxy. In fact, it is recommended to use latex over epoxy by the paint manufacturers, rather than using epoxy over epoxy. The latex adheres better and if you then want to use epoxy next time you paint, you have a nice coat of latex between the layers. If you use epoxy over epoxy, often the paint will just peel off in layers once some time passes (and sometimes right away).
Yes you can.
ratio of catalyst to paint
You paint it with epoxy primer.
It doesn't appear regular epoxy paint will work for inhibiting mold growth, but there are epoxy wall coatings that have a mold inhibitor in them. One of them is called The Basement Doctor Epoxy.
Enamel paint can be used on porcelain or iron bathtubs with great results, so I'll walk you through this process, just in case you're unsure about how to do this.You Will Need These MaterialsWhite vinegar WaterTowel Palm sander 150-grit sandpaperRespirator mask Plastic bag Tape Epoxy enamel spray paint Oil based primer Oil based enamel paint 1200-grit wet/dry sandpaper InstructionsClean the bath tub thoroughly with a mixture of white vinegar and water. The vinegar will help remove any dirt or greasy residue on the tub. Rinse the tub to remove the vinegar and dry it with a towel.Equip a palm sander with 150-grit sandpaper. Sand the inside and the outside of the tub to roughen the surface, this will allow the paint to properly adhere to the bathtub.Remove the fixtures of the bathtub or cover the fixtures with a plastic bag. Tape the bag down at the base of the fixtures to prevent painting them when you paint the inside of the tub.Spray the inside of the bathtub with an epoxy enamel spray paint such as Krylon epoxy enamel paint. These paints are available at most home improvement stores and will resist moisture which is necessary for paint on the inside of a bathtub.5 Paint the outside of the tub with an oil based metal primer such as Rust-Oleum metal primer. Let the primer dry completely.Apply a coat of oil based enamel paint to the outside of the tub. Let the first coat of paint dry and then apply a second coat.Sand the second coat of paint with 1200-grit wet/dry sandpaper used wet. This will help shine the enamel paint.I hope this helps you out with your project! Good luck!--The Violet
No, Seal-Krete Epoxy-Seal is an acrylic-epoxy blend. By mixing 2 unlike resins (patio paint and Epoxy-Seal) the hard Epoxy-Seal acrylic-epoxy resins would become weak resulting in a coating failure. No, Seal-Krete Epoxy-Seal is an acrylic-epoxy blend. By mixing 2 unlike resins (patio paint and Epoxy-Seal) the hard Epoxy-Seal acrylic-epoxy resins would become weak resulting in a coating failure.