answersLogoWhite

0


Best Answer

Your Electronic Ignition Switch is bad. It is located on the inside of the Jeep under your steering column.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why do I have no running lights front or back and no tail lights- head lamps signals and flashers work fine-1989 Jeep Cherokee Laredo?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Are flashers reqired on motorcycles?

No turn signals are not by law required, as long as you have your headlight, brake light, and you know the hand signals for turning on a bike than you don't need flashers. But if you're not using flashers, you are still required to use hand signals


98 buick lesabre flashers work but turn signals don't. what do i try next?

what do i try next? i tried a new flasher on the steering column. my flashers work, but turn signals don't.


Flashers work turn signals dont fuse is good on 1995 s10 blazer-what's wrong?

because there are two diffrent flashers 1 for the flashers and 1 for turn


Why does the emergency lights work and the blinkers don't on a 1991 mustang?

this car may have separate flashers for the turn signals and the emergency flashers


Why does your emergency flashers work on your 93 g20 Chevy van but not the turn signals?

There are two relays, one for the emergency flashers, and one for the turn signals. Your turn signal flasher is defective and needs replacing.


Why the Turn signals and flashers are not working on a Toyota?

Hand signals are to this day a legal form of traffic control devices.


Where are the turn signals and flashers on a 1992 Buick Regal CS?

My turn signals are not working on my 92 buick regal.


Why did my signals and flashers quit on my 2004 Monte Carlo?

Replace the flasher relay.


Your turn signals do not work but your flashers do on a 1996 Honda accord ex.?

yes


Your blinkers wont work but the hazards do in your 94 acura integra it is a fuse?

There are two different flashers on vehicles. 1 for the turn signals, 1 for the hazard flashers.


When Turn signals do not work but flashers do?

i guess wait for a while then it does not turn just go


02 Monte Carlo turn signals not working but fuse is ok?

Turn the emergency flashers on and make sure that they are flashing at a normal rate of speed. Then turn your emergency flashers off and try one of your turn signals and it should work.