answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Why do all washing machines have the lid locks?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What did a washing machine look like in the 1920s?

1920's washing machines didn't have a lid. You would have to get the hose from the garden and fill the washer machine up!


Kenmore washing machine will fill with water and drain off but will not spin water out or wash?

If a Maytag washer fills with water but does not agitate it could a problem with the switch in the lid. There is a switch that locks the lid down during agitation and spinning. The magnet could be defective.


Why wont Kenmore washing machine spin?

The wig-wag or spin actuator or belt is faulty. -Simple problem for someone experienced in washing machines.


Why wont my washingmachine agitate?

Could be lots of reasons. Most washing machines have a small pin on the lid usually opposite the hinges that pushes down on a switch when the lid is closed. Sometimes this pin breaks or comes out. This is a safety feature so that someone doesn't get caught in the wringer.


What are some examples of machines?

a screwdriver opening a the lid of a paint can


What causes the door locks not to operate in a 2005 Chrysler Town and Country?

My door locks stopped working and I pulled the IOD fuse and reset it back after starting the vehicle. Now all locks work great to include the remote process. The IOD is mapped on the lid of the fuse box.


Which is not a simple machine a faucet handle a jar lid a can opener seesaw?

A faucet handle and jar lid are simple machines.


What do you do when your washing machine is done a load of laundry but still full of water?

The pump may be bad or weak. You can check the small lid switch under the lid. When you close the lid...it will engage. These will sometimes get out of sinc with the lid and not engage.


Washing Machine Lid Switch Repair?

If your washing machine will agitate, but refuses to spin out, you more than likely have a bad lid switch. A lid switch, when working properly, tells the washing machine when the lid is closed, thus allowing the washer to spin out. A faulty switch will signal that the lid is still open, even though it isn't, and the water will not spin out. Repairing a lid switch is easy for the average do-it-yourself person with some instructions from internet sources, especially videos. These switches will run anywhere from $20-$60 depending on the machine and are found at your local appliance repair centers.


Where is the serial number on a washing machine?

There should be a tag under the lid on the rim of the opening.


How do you fix my kirkland signature washing machine that won't drain?

It sounds like a lid switch to me. i just don't know what a Kirkland signature machine is like, but all machines have some kind of switch to make it turn on And when they go out your machine will not drain. Go to Youtube and see if they have that type and they will show you how to fix it step by step. It's free


What are the parts of washing machine?

A washing machine is a complex appliance with several parts working together to clean your clothes efficiently. Here are the main parts of a typical washing machine: Control Panel: The user interface that allows you to select wash cycles, adjust settings, and start the machine. Drum or Tub: The main cylindrical or drum-shaped compartment where you load your clothes for washing. Agitator (Top-Loaders): A central spindle or post that rotates and moves clothes around in top-loading machines to agitate and clean them. Pulsator (Top-Loaders): An alternative to the agitator in some top-loading machines, it uses pulsating water to move clothes. Washing Machine Motor: The electric motor that drives the various components of the washing machine, such as the drum, pump, and agitator. Pump: The pump helps drain water from the machine during the spin cycle and may also help circulate water during washing. Water Inlet Valve: Controls the flow of water into the machine, allowing it to fill for the wash cycle. Drain Hose: The hose through which water is expelled from the machine after washing and rinsing. Lint Filter or Trap: A filter that catches lint and other small particles from the clothes to prevent them from entering the drainage system. Heating Element (Some Models): Used in some washing machines to heat water for certain cycles, such as hot water or sanitizing washes. Door/Lid Lock: Ensures the door or lid remains securely closed during operation to prevent water from splashing out. Door/Lid (Front-Loaders) or Lid (Top-Loaders): The opening through which you load and unload clothes. Timer or Electronic Control Board: Controls the timing and sequencing of various parts of the washing machine during each wash cycle. Detergent and Fabric Softener Dispensers: Compartments where you add detergent, fabric softener, and sometimes bleach for automatic dispensing during the wash cycle. Shock Absorbers or Springs: Help reduce vibrations during the spin cycle, ensuring the machine remains stable. Seals and Gaskets: Help prevent water leaks, particularly around the door/lid. These are the primary components of a washing machine, but it's important to note that the exact design and additional features may vary based on the brand, model, and type (top-loading or front-loading).