because 3Phase power - V X I X Cos Phi X Square root of 3
and square root of 3 - 1.73
what do you mean by multiplication
that is called a form factor which is always b 1.1
The input voltage (primary) and output (secondary) of a transformer is determined by the manufacturer. Transformers are bought to accommodate the voltage that is needed on the primary side and to what voltage is needed on the secondary side.
On large service entrance services the neutral can be reduced. The amperage of the service and the voltage of the service and the insulation factor of the 500 MCM conductors need to be stated to answer this question correctly.
The voltage is attenuated by the resistance in the media used for transmission. This is regardless of the power factor.
CT/5 /number of turns=multiplier
watt meter is constructed such that it read only power on a single scale. Only single scale will available to read the measured power. In order to take the accurate reading just we measure the reading and we will multiple along with factor called multiplication factor. That's depends on on which voltage knob we connected and also the current. Multiplication factor can be determined by: Multiplication factor =(voltage range*current range*pf)/Max scale deflection.
They are not the same you need to know the voltage as well.
Factor multiplication is the process of multiplying prime factors. The product of factor multiplication is the number that the prime factors are multipilicands of.
what do you mean by multiplication
voltage, current and power factor
The current is the same in the three live wires. The voltage can be described as the line voltage (phase to neutral) or the phase voltage (phase to phase) which is larger by a factor of sqrt(3). So a line voltage of 230 v corresponds to a phase voltage of 400 v.
The Prefix 'da' is a multiplication factor. It stands for deca and In this case is a multiplication factor of 10.
simply by measuring the coil voltage, coil current & power factor.
the multiplication of two numbers is called a factor the answer to a multiplication problem is called a product
The current is the same in the three live wires. The voltage can be described as the line voltage (phase to neutral) or the phase voltage (phase to phase) which is larger by a factor of sqrt(3). So a line voltage of 230 v corresponds to a phase voltage of 400 v.
factor * factor = product