Not to electricute yourself, die, start a fire, burn your house down, kill your family, kill your neighbors family, kill your dog, kill a firefighter, kill your grass and because I told you to are all good reasons to diconnect the battery.
how to change hid bulb in a 2007 escalade
The lenght of a H4 HID Bulb is about 4 cm from the tip of the bulb to the en of the bulb where it enters the docking plate
If the car has HID lights you must disconnect the battery and wait 20 min. before starting, high voltage. They you can unscrew the plastic cover behind the light fixture, you will need a very short screwdriver for this , very tight space, then disconnect the bulb from the housing , make sure when replacing new bulb you don't touch it with your finger's, the moisture from your finger's will make it burn out. Then simply place bulb in place and connect and replace cover. Simple
No. An hid bulb has a transformer (ballast) that produces a certain voltage needed to fire the gas in that lamp.
No
You can easily change to regular lights, all you have to do is bypass the amp that's located behind the radiator on the passenger side. Make sure you disconnect the battery before you touch ANYTHING, because the amp creates enormous amounts of power that could actually be fatal. Hard to imagine from a 12V Battery right? Once you bypass the amp, you'll have to find a way to fit a regular bulb in your hid light sockets...just be creative.
the NiteRider HID Firestorm produces 500 Lumens its bulb equals that of a 40watt incandesent bulb ,but with a much brighter white color
H1
Generally:Disconnect power supply to bulbPlug in HID Kit ballast unit to power supply to bulb. This may require drilling a hole in the rubber or plastic rear coverSecure Ballast unit to the vehicleRemove old bulbPlace HID bulb in holderConnecting output of ballast to HID bulbThis will vary from manufacturer to manufacturer, and your HID kit should come with instructions.
Any HID head lamp bulb above 6000K are illegal.
8,000K or 10,000K
H11