It could be the crank sensor, depending what year vehicle you have.
Check the ignition control module (autozone) and check coil resistance. After that not sure I have same problem with new icm and new coil.
That year blazer does not have either one of those sensors. If you are not getting any spark to the spark plugs. You should replace ingnition module. Need to make sure the coil wire is good, check ingnition coil also.
Is it a brand new distributor ? If not then replace the module and pick-up coil in the distributor that you have.
The spark travels from the coil to the distributor then from the distributor to the plugs. So if you have spark going into the distributor but not coming out to the plugs, I would blame the distributor cap and rotor being at fault.
None -inside the coil
The magnetic plate in the distributor shaft, for the pick up coil, may be cracked.
spark plug
how do you put spark wires in the right place on the coil pack on a 1995 Chevy cavalier2.2 frank
No spark.
mounted next to the ing coil on the same bracket
IF IT has a pick-up in the Distributor.IF not t could B a Crank sensor.
On top beside the intake on passenger side of vehical... You can trace coil wire from distributor to find