replace crank sensor
The motor mounts should not keep breaking if they are installed properly. The delay in the transmission indicates it needs work, probably a rebuild.
Carquest is where i got mine... get motor mounts factory spec this will keep other parts of your engine from having to absorb the shock of the motor
Transmission mounts are they considered motor mounts? After saying that how many motor mounts do I need to replace, if I change out all of them.
2 motor mounts.
The 1997 Ford Taurus has for motor mounts and to transmission mounts. Worn motor mounts and transmission mounts will allow the engine and transmission to have movement.
This you could get away with for awhile without further damage. Motor mounts have a built in safety device to keep the engine in place when the rubber mount breaks.
how many motor mounts does a 2005 nissan altima have
There are four motor mounts on the 1986 Buick Park Ave. There is one motor mount on each corner of the motor. The motor mounts will be on the bottom of the motor.
Carefully place a jack with a block of wood under the motor, loosen mounts from motor, jack motor up just enough to remove old mounts, replace mounts, lower motor onto new mounts, tighten motor to mounts. Make sure there aren't any hoses, wires, lines, etc. that may tear while lifting the motor.
Carefully place a jack with a block of wood under the motor, loosen mounts from motor, jack motor up just enough to remove old mounts, replace mounts, lower motor onto new mounts, tighten motor to mounts. Make sure there aren't any hoses, wires, lines, etc. that may tear while lifting the motor.
The 1999 Mitsubishi has four motor mounts. There is a motor mount on each corner of the engine. The motor mounts can be seen from the bottom of the engine.
I don't see impacting the water breaking the motor/tran mounts. My guess is they were broken prior to the accident.