hit the lock button twice
2003 Kia Sorento 2.5L Diesel has a knob on the dash (next to the 2W/4W drive switch knob) power remote headlight switch to adjust the headlight level.
You can only turn off the headlights by applying the emergency brake. When the emergency brake is on, the headlights will not light. Otherwise the best of my expererience is that they are on all the time. If you have remote start, put the emergency brake on before you leave the vehicle and when you remote start it, the headlights will not be on, but the driving lights (if switch is on) will be on as well as the parking lights.
The setting is a remote Island of Alaska.
I am not a professional, but an avid Explorer owner (I am on my third). What you are describing sounds like it might be as simple as a headlight relay. Sometimes, the contacts stick together, causing the circuit to remain energized. In other cases, relays coils may fail, causing a "normally open" circuit to become closed. This is usually the case with cars that have alarm or remote entry systems where lights are flashed upon activation, regardless of the headlight switch position. Just a thought.
no but sometimes you can find the remote sold seperatly online.
YES! Press the Home button on the remote, go down to Wii Remote settings, press A and there should be a Wii Remote sound setting
go to tools and the remote control (make sure your nxt is connected
1. Make sure that your batteries are fresh; two are required and are sold at most drug stores. Energizer #CR2016 2. If you are replacing the batteries, take the time to clean the contact points with an alcohol swab. There are four under the rubber button cover and the battery contact makes five cleaning points3. Get in the driver's seat and close the door.4. Pull the headlight flasher stalk toward you and keep it in this position, the headlights will be on when you pull this stalk towards you.5. Insert the key into the ignition and turn it to position one. Position one will not energize your dashboard6. Release the headlight stalk and then pull it towards you four times, flashing the headlights each time; you should end this sequence with the headlight stalk in its normal released position and the headlights off7. A beep will be heard and a small red light will show on the gear shift gate surround8. Press the unlock button five times, each time you ought to hear a beep...count the beeps!9. After the fifth beep programming is complete10. Remove key, step out of car, close door and test11. If you have more than one remote to program, alter step 8 in the following way:2 remotes: press one remote unlock two times, the other remote unlock 3 times3 remotes: press the first remote unlock two times, the second remote unlock two times, the last remote unlock once4 remotes: press the first remote unlock once, the second remote unlock once, the third remote unlock once and the fourth remote unlock twiceThe reason this works with multiple remotes is that the programming mode is only memorized when the unlock button is pushed a total of five times, no matter how many remotes you use.5 remotes: press each remote just once
Press Menu on the remote, select Setting, select Lamp Counter
Remote control ceiling fans are modern appliances that can be fitted at home or in the office. The setting and operations are done using a remote which provides so much convenience.
maybe you need a new battery in your remote control
One can find Direct TV remote control codes by following instructions when setting up their TV. Turn the TV on and set the remote to "TV". If one does the setting up correctly, the TV will turn off when the code is right.