wrench for lug nuts on f250 is 7/8s of an inch there is a metric wrench that fits but i cant remember what size it is
( No ) the 2000 Ford F-250 Owner Guide and one of Fords websites shows ( 8 lug nuts for each wheel , 32 total )
22 mm or 7/8" will work
lug nut size is 7/8 of an inch and i think 17mil is metric size
Thread size is 9/16-18. Need a 7/8 socket for removing the lug nuts. Bolt pattern is 5 on 5.5"
The lug nut size for a 2005 Honda Odyssey EX is 7/8". Lug nuts are used to secure an automobile's wheel to its axle.
F150s had a 5/135 stud pattern ( 5 lug, 135mm pcd ) from 1997 to 2003, with 12mm diam studs. F150 XLs were 7/150 with 14mm studs.
1. Remove the five lug nuts 2. Remove the tire 3. Remove the four lug nuts 4. Remove the two screws 5. Remove the drum from around the brakes 6. Remove the four nuts underneath that 7. Pull the axle out
if you're tightening the lug nuts on the wheels: 11 o'clock to 5 o'clock to 9 o'clock to 3 o'clock to 7 o'clock. do not do in a clockwise motion the rim will tighten off balance
firewall 4 - 8 3 - 7 2 - 6 1 - 5 front ( Ford V8 engine )
firewall 4 - 8 3 - 7 2 - 6 1 - 5 front
firewall 4 - 8 3 - 7 2 - 6 1 - 5 front