It's a self diagnostic feature of the heated seat system. If the switch high and low indicator lamps are both flashing indicates the heated seat element is shorted. If the switch high lamp is flashing and the low is off then the heated seat element is open. This diagnostic feature only lasts for about 1 minute, that's why it goes out.
There could be a problem with the system of the machine.Tried pressing the heated dry and heated wash one after the other for 5 mins. that should make the light go away.
the currents would stop as soon as the heated substace has cold completely.
If red ink is mixed with water and heated, the ink will begin to dissolve in the water. The heat will increase the rate at which the ink molecules separate and mix with the water molecules. Eventually, the ink will completely disperse in the water, resulting in a colored solution.
Heated seats were optional. The only way to be completely sure they are installed on a specific Jeep Cherokee is to look for the switch that turns heated seats on.
because it wants to pop teheheh
The particles in a liguid are bonded (not as strongly as a solid which is why it flows.) when it is heated the particles vibrate and eventually the bonds break and the particles break away. This is evaporation.
It will bend eventually because u have heated it up so much it wouldn't be able to function It becomes molten like the lava in the earth.
Obviously, it would bubble and eventually burn up ;)
Prolonged heating of the slide can cause the slide to shatter.
Upon heating, vegetable oil will first become less viscous (less thick and more runny) as it is heated, and eventually, if heated hot enough it will smoke and then burn.
The boiling point.