Manufactuer defect best way to fix is to put a bolt under clutch to keep clutch pedal from pushing rod to far an blowing seal in master cylinder. Bought six before figuring out the solution. Hope that helps
This is a far reaching question that needs more clarification. There are cylinders where the pistons are located. If you have a clutch then you have a clutch master and slave cylinder. On the brakes you have a master cylinder and wheel cylinders. And the beat goes on. You need to distinguish as to which cylinder you are referring.
Need to know how to assemble 95 Chevy clutch master cylinder?
Faulty Clutch Master cylinder.
How do you change a Master Cylinder and hydraulic clutch line for a 1998 Chevy S10?
The clutch master cylinder on a Chevy S10 is replaced by disconnecting the metal lines, unscrewing the retaining bolts, and removing it from the housing. A new master cylinder can then be put into place and reattached.
on tims HEAD
Either the clutch master cylinder or the clutch slave cylinder or the clutch hydraulic lines are leaking.
You can't, there is no adjustment. Time to replace clutch, slave cylinder or clutch master cylinder. 1 of the 3.
It is by the brake master cylinder
No.... There is not an adjustment what so ever. You either have a bad clutch slave cylinder / clutch master cylinder. Are the clutch and pressure plate are worn out.
There is no adjustment on that year. You either have a worn out clutch disc or a bad clutch slave cylinder. Could be a bad clutch master cylinder too.
You may need to replace your master and slave cylinders for the clutch. Try pumping the clutch while the truck is running while it is in neutral. if its easy it shift after doing that than that's probably your problem