Want this question answered?
if battery is ok chech netural saftyswitch
try replacing ignition condensor
Toyota Supra, Toyota Solara, Dodge Super Bee, Dodge Stealth, Pontiac Sunfire, Buick Skylark, Caterham Super Seven HPC, Westfield SEiGHT, Chevrolet Silverado, and GMC Sierra.
these cars are weird if you lock it you have to unlock it from the passenger side or it will not start you can not unlock it from driver side its weird try it
Could be fuel delivery problems such as a plugged up fuel filter, faulty fuel pump, faulty fuel pressure regulator,
its too cold
Have You Tried The Starter Inhibitator? On Autos They Have A Switch That Stops The Car Being Started In Any Gear settings Other Than Netural Or Park And Some Even Have Them On The Brake Pedals Too So That You Have To Start Them With It In Neutral/park And Have Your Foot On The Brake Pedal. You Can Bypass Them But I'm Unsure How To Or You Can Remove And Replace Them. Regards M.R.
They are both inline 6's, but they are slightly different in everything else. Toyota made the engine from the landcruiser to have more torque in the lower engine speeds, and less power in the higher engine speeds. this is good for 4-wheeling and towing and hauling your stuff around. The Bore is probably similar to the supra engine, but i'm pretty sure that the stroke is probably longer, and so the engine out of the landcruiser wouldn't be able to rev as high as the supra engine. The supra engine is made for power in the higher engine speeds, and doesn't need any torque really other than what's required to start up a hill that is paved. The engine revs faster and is also capable of producing more horsepower than the landcruiser engine because of its shorter stroke but increased design modifications
The 2jzge engine came in the following models: 1993 - 1998 Lexus GS 300, and SC300, and the Toyota supra non- turbo. Speed ranges for all these cars start around 144mph - 150 mph.
Start in the center and work you way outward, loosening them slowly. Keep working back and forth until they are all loose. Make about 3 passes before you loosen them all.
If the check engine light is or has been illuminated, start with checking for codes.
The cold start injecter is located in the middle of the intake manifold with the brake master cly. right in the way