Getting a scan to see if there are any codes could be a start. Alot of parts stores do it free. If it is mechanical, like a suspension piece, it will be a particular sound usually or a particular troubleshoot. As a basic, check all fluids, raise front of vehicle and feel for play in the front wheels, left to right and up to down. Also check braking components. Or an engine part malfunction. Any number of things can be wrong. It's a matter of narrowing the field down to the problem area.
could be u-joints are loose or worn; check all the bolts on and around the driveshaft to be sure they`re torqued to spec, also check your rear suspension components for wear.
open drivers door and read the tag by the door latch! ONLY if you happen to have a Ranger. if you dont you are out of luck and this person is only making noise.
How to repair power window in 2000 Ford Ranger passenger window will not work with either drivers button or passenger button the relay does not make any clicking noise either What is wrong?
can you use a transmission from a 1993 ford ranger in a 2000 ford ranger?
where are the fuseible links located on a 2000 ford ranger
Noise - 2000 is rated/received certificates of: Australia:R
Tales of the Unusual was created in 2000.
If it sounds like a woosh it is probably a valve. Hope this helps.
bolt pattern for 2000 ford ranger & ft pounds
Bank 1 is the passenger side of a V6 engine in a 2000 Ford Ranger
5W-30 , according to the 2000 Ford Ranger Owner Guide
No , the engines in a 2000 ford Ranger are E.D.I.S. ( Electronic Distributorless Ignition System )