0
Why does engine oil light come on when you push the brake pedal?
Wiki User
∙ 13y ago
When you are getting kinda low on oil and it is almost to where you need an oil change when you brake it sloshes the oil and makes the light go off.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Is it normal for the brake light an abs light to come on when fressing the parking break?
No , the brake light should come on when you press the parking brake pedal , but the ABS light should not come on
What causes the brake light to come on 2000chevy blazer?
Usually in every vehicle the brake lights come on when the brake pedal is pushed in. There is a switch connected to the pedal in some way to make the light switch on.
Where is the brake light switch in a 1988 740 Volvo?
Look under the dash on the driver's side, half way down the brake pedal. When you depress the brake pedal, the pedal moves away from this switch, which allows the brake light pedal circuit to complete, and your brake lights come on. This brake light switch is always hot/on, as required by federal law, so that even with no key in the ignition, if you hit your brake pedal, the brake lights will come on.
What to do when the break light is on?
tighten brake switch located on top of brake pedal under dash adjust so lamps are out and come on with light pressure on pedal.
What does a brake light switch do?
just as the name it makes the brake lights come on when u press on the brake pedal
Why don't your brake lights come on when you brake?
Check fuses first but its probably the brake light switch under the brake pedal.
Why do brake lights come on with ignition and not work on pedal?
The brake light switch is either out of adjustment or defective.
When brake pedal is pushed what lights must come on?
The brilliant red stop light will come on
What causes the brake light on a 200 Chevy blazer to come on?
If nothing is holding the pedal down then the brake light switch is at fault.
Does the check engine light come on if the brake fluid is low?
No, the red brake warning light will come on.
What would make your brake light to come on and your truck to lose power briefly?
applying pressure to the brake pedal
Why do you have to pump on the brakes to get the brake lights to come on?
You need to adjust your brake light switch. It should be located on the brake pedal. Unplug the switch and loosen the nuts to adjust the button closer to the brake pedal.
