there could be more than one factor it sounds like the actuator is bad or if your blazer has partial vacumm control then you could have a vacumm leak
There is no "kill switch" on that Chevy Blazer.
No. A Chevy Blazer does not have a reset switch.
Need to know what year the Blazer is.
The 4WD version of the Trailblazer has a rotary switch to the right of the steering wheel. The positions are 2hi, AWD, 4hi, 4lo. There is a N light for neutral. Rotate the switch clockwise from 2hi to AWD to let the computer select when to provide power to the front wheels. Rotate from AWD to 4HI to have 4 wheel drive. Remember to refer to the Owners manual for the maximum speed that you can travel in 4HI and 4Lo, and also how fast you can be going when you switch between modes. To go back, just rotate the switch counter clockwise.
where is the fuel pump inertia switch located on a 2000 blazer
The 1997 Chevrolet blazer actuator switch is located on the firewall in the engine compartment. The switch is on the passenger side of the engine compartment.
No, there is no suck switch.
There is none.
No it does not.
No, it does not.
The fuel cutoff switch, on your 1998 Chevrolet Blazer, can be found on top of the fuel injector pump. The fuel injector pump is on the back side of the engine near the top.
A 2000 Chevy Blazer is a GM vehicle. Vehicles made by GM do not come equipped with an inertia switch.