Why does he have to hold the TV remote?

To program a One for All remote to be used on a Symphonic television, turn on the television manually. Then, hold down the television button on the remote, and push the power button until the television shuts off.

Without knowing the remote model number, I would do this: To do a brand code search for Sharp: Manually turn on the TV. Hold down the "TV" button on the remote....while holding it down also hold down the On/Off button on the remote for 3 seconds. Release both buttons. Press the number 6. The TV light on the remote should blink once. Press the On/Off button on the remote repeatedly until the TV turns off. When the TV turns off, press the STOP key on the remote to save the code. That should be it.

Hold select and TV until the TV light turns red, hit 101 and the TV should turn off. Hit TV again and your remote should be programmed to your TV.

To program my Samsung Bluray remote for my Sony TV I had to turn on the TV then hold down the "TV Power" button on the remote and enter the numbers 35 while still holding down the "TV Power" button. You can try 48 if 35 doesn't work.

Press and hold the MUSIC button on the remote control

Select menu, click on system setup, select 'remote', select 'program remote', select 'tv', select your type of TV. Slide the top slider on your remote to 'TV', press and hold the yellow select button and the mute button until the light above TV on the remote flashes twice, enter the first remote code on the screen and then press power to see if the tv shuts off. If the TV does not shut off repeat for the other codes on the screen.

If your LG DVD remote has a TV control section, normally with a white line around it,simply hold the TV power on/off button and then push up and down on the TV channel selector. Your TV will turn off. The remote is programmed. Hope this helps

Select a channel on your TV. Direct the Sky+ remote from the TV and the TV button. Press and hold until a red light at the top of the remote blinks twice. Put in the 4 numbers from the Sky+ and afterwards press the Select. There should be a red light that flashes twice. Codes can be found online at the Sky Remote TV Code Checker.

I have provided instructions on how to perform a power scan with your DISH remote for finding a TV code. We do not have manual codes for your brand TV yet. Remote: Basic Remote (Television Only) Turn the Television On. Press and hold the clear TV button for three seconds until the LED flashes. Press and release the TV Power button. Press and release the Up or Down Arrow on the remote until the television turns off. After the television turns off, press and release the # button. Test functionality with the TV. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

The 4-digit lock code for the Mitsubishi television Model # VS-50603 will depend on what remote a person is using with the television. If the television is going to be used with a satellite television remote, contact the television service provider. If using the Mitsubishi television remote, try 9999. A person can also turn the television on, hold down the TV button on a remote and keep hitting the on/off power button until the television turns off.

It will depend upon the TV brand. Most TVs use different codes. I have provided the instructions on how to perform a power scan to program the remote to the TV. Remote: Basic Remote (Television Only) Turn the Television On. Press and hold the clear TV button for three seconds until the LED flashes. Press and release the red TV Power button. Press and release the Up or Down Arrow on the remote until the television turns off. After the television turns off, press and release the # button. Test functionality with the TV. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

We don't have remote codes for the Silo TV so I have provided the instructions for performing a power scan to program the remote to your TV. Remote: Basic Remote (Television Only) Turn the Television On. Press and hold the TV Power button for three seconds until the LED flashes. Press and release the Red TV Power button. Press and release the Up or Down Arrow on the remote once every second until the television turns off. After the television turns off, press and release the # button. Test functionality with the TV. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

One can usually reboot a remote one of two ways. Either press and hold the reset switch, if one is present. If not, then take out and replace the batteries in the remote.

We don't have TV codes for the Soyo TV yet but I have provided instructions on how to perform a power scan with the DISH remote to locate a code that could possibly work your Soyo TV. Remote: Basic Remote (Television Only) Turn the Television On. Press and hold the clear TV button for three seconds until the LED flashes. Press and release the Red TV Power button. Press and release the Up Arrow on the remote once every second until the television turns off. After the television turns off, press and release the # button on the remote. The TV mode button will flash 3 times. Test functionality with the TV. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

I have provided instructions on how to perform a power scan to find a code for your Polaroid TV. Remote: Basic Remote (Television Only) Turn the Television On. Press and hold the clear TV button for three seconds until the LED flashes. Press and release the red TV Power button. Press and release the Up or Down Arrow on the remote until the television turns off. After the television turns off, press and release the # button. Test functionality with the TV. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

I belive there is a certain remote code for your television consult the manual for the television and the remote

what is the steps to program my jvc tv remote? I have a radioshack 3 in one tv remote control,How do I program it ?

I have provided instructions on how to program your DISH remote to your TV. Since we don't have codes for Honeywell TVs, the instructions are for a power scan. Remote: Basic Remote (Television Only) Power Scan: Turn the Television On. Press and hold the clear TV button for three seconds until the LED flashes. Press and release the red TV Power button. Press and release the Up or Down Arrow on the remote until the television turns off. After the television turns off, press and release the OK button. Test functionality with the TV. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television. Try an Avex R6 Universal remote control. I bought mine for $20 at Walmart. You can use your Dish network remote to program the universal. The TV was picked up with the "Quick Set-up Method" or you can use your TV remote to program buttons also.

A new remote will usually work with your TV, as long as it a newer model and your remote carries the TV remote code.

Your new TV has a code that corresponds to the brand and make. Without knowing your TV brand, I can't give you the codes but I can provide instructions on locating the code in your remote. Those instructions are below: Power scan: Remote: Basic Remote (Television Only) Turn the Television On. Press and hold the clear TV button for three seconds until all the LED flashes on the top of the remote. Press and release the red TV Power button. Press and release the Up or Down Arrow button on the remote until the television turns off. After the television turns off, press and release the # button. Test functionality with the TV. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Listed below are the remote codes for the Element TV and DISH remote: 627, 902, 659, or 912. Here is the instructions for programming the remote to your TV: Remotes: Basic (Television Only) Turn the Television On. Press and hold the clear TV button for three seconds until the LED flashes. Enter the three-digit code using the buttons on the number pad. Press #. Note: The LED will flash three times. Test functionality with the TV. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Below is the instructions for performing a power scan with our DISH remotes: Remote: Basic Remote (Television Only) Turn the Television On. Press and hold the clear TV button for three seconds until the LED flashes. Press and release the red TV Power button. Press and release the Up or Down Arrow on the remote once every second until the television turns off. After the television turns off, press and release the # button. Test functionality with the TV. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Use the TV remote and hit 03. Do not use the satellite remote only the TV remote.

If remote control for television will not function then you have to control the television manually.

I have provided the remote codes for your Sanyo TV and instructions on how to address the remote to your TV Remote codes for Sanyo TV: 590, 683, 589, 090, 591, 111, 652, 542, 987, or 692. Address remote to TV: Remotes: Basic (Television Only) Turn the Television On. Press and hold the clear TV button for three seconds until the LED flashes. Enter the three-digit code using the buttons on the number pad. Press #. Note: The LED will flash three times. Test functionality with the TV. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.