0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you know when riding mower deck spindles are bad?
Normally you will start to hear a loud grumbling sound from underneath the mower when the blades are engaged. With the mower shut off, release the tension from the belt for the blades. Raise the deck so you can grab the blades from the bottom. You should not be able to rock the blades from side to side or up and down. If you can then you probably have a bad spindle. You can do this for wach of the spindles to check them all.
Why would a lawn mower bog down when engaging blades?
belt to tight, gummed up drive pulleys, dry gearbox, weak or ancient motor.
Why does your Huskee riding mower stalls after engaging blades?
The seat safety switch is not working properly correctly. If the safety does not sense that there is anyone on the seat then it will shut down the mower. This keeps the mower from running over someone if they would happen to fall off while mowing. Or if the safety is working you may have bad bearings on your deck and that will also stall your motor, or something jammed in the blades.
Why isn't your riding lawn mower cutting grass?
Assuming the blades are rotating but not cutting grass, the blades may be very dull or they were replaced upside down when removed for sharpening.
What direction do the blades on a john deere riding lan mower turn?
if you are sitting in the seat and looking down at the deck the blades will or should be turning clockwise, although in this position you cannot actually see the blades. pay attention when installing the blades not to turn them upside down. the cutting edge should be turninh clockwise on all blades.
Why does your lawn mower shut down when the blades are engaged and you put it in reverse?
I have a 2003 Cub Cadet 1525. This model is designed to shut off the cutting deck when the tractor is put into reverse. Not sure what model you have but my guess is that it's just a safety precation like the Cub.
Cub cadet dies when blades are engaged?
Make sure that the engine is running at full speed, or the blades may choke the engine down. Also check the blades (with the engine stopped) to see if something is causing them not to rotate. The Cub may also have safety switches, if one goes bad then the motor could die as a safety feature( it thinks you fell off, the parking brake isn't engaged, etc..) Different Cubs have different safety switch configurations.
Huskavarna YTH-2148 time the blades?
I would suggest running down to your local auto parts store and picking up a timing light. Once your ready to time the blades, jack up the mower, start it, and engage the PTO. Now crawl under the mower deck and shine the light up there.
Why does my wheel horse mower deck blades slow down when I go into grass?
Maybe you should tighten the drive belt or it could be the PTO clutch is slipping.
How do i sharpen the blade on my mower?
Firstly, to sharpen the mower blade, remove it from the lawnmower and get any rust off with steel wool. Clamp the blade down and run along it a file. For badly damaged blades, it would be best to take it to a professional.
What is a self mulching lawn mower?
It is a lawn mower that is set up so that the grass, once cut off, is chopped finer by the blades before being left behind. The mulch is supposed to be so fine that it drops down between the grass and helps fertilize the lawn, breaking down quickly.
What cause your riding mower to idle up and down when am mowering?
When mowing it will idle up and down because of the amount and thickness of grass you are cutting. This is because the blades will struggle cutting thick grass so the engine needs more revs to keep the blades running at a constant speed and that is also why your mower may slow down because it has used the majority of revs to cut the grass and their are not many revs left to keep the wheels spinning The up and down revving could also be caused by a dirty/clogged air filter.
