0
Normally you will start to hear a loud grumbling sound from underneath the mower when the blades are engaged.
With the mower shut off, release the tension from the belt for the blades. Raise the deck so you can grab the blades from the bottom. You should not be able to rock the blades from side to side or up and down. If you can then you probably have a bad spindle. You can do this for wach of the spindles to check them all.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Photo or video of deck removing sears riding mower?
i changed the belt on my 42' craftsman riding mower, belt route is right but may belt is burning up. I don't know if my levers are connected right.
Lawn Mower Parts?
form_title=Lawn Mower Parts form_header=Make sure you have the best lawn mower parts with our help! What brand of lawn mower do you have?*= _ [50] Do you own a push or riding lawn mower?*= () Push () Riding Is your lawn mower electric or gas powered?*= () Electric () Gas If you know what part you specifically need, please list it*= _ [50]
Why does the center blade spin on my mower deck and the outer ones don't?
Its yours how should we know?
Where can you find Air Filters for a Weed Eater Riding lawn mower Model?
You can get them at any mower shop. Most Lowes and Home Depot stores will carry them also. You just need to know what engine is in the mower.
How do you know if the starter on your riding lawn mower is defective?
Bypass the switch with a jumper & see if you can bump it with a hot wire.
Does anyone have electrical schematic for Scott riding lawn mower?
Ask a friend or someone you know or go to a tool store
How do you change the belt on a Snapper mower model Lt16002 with a deck model 84804 I do not have a manuel does anyone have a diagram or know how to change the belt on the deck?
make a drawing of how the old one is on it before replacing it,
How do you put deck belt on huskee lt 4200 lawn mower?
Changing the deck belt on the Huskee IT4200 lawn mower involves working around the spring and 2 belt drive guides in the motor area. Properly loading the spring before the guides is the secret to success.
Poulan Riding mower 17hp 42 cut and a spring came off during mowing It obviously has to do with the blade deck as it now cuts to the groundAnyone know where spring goes?
I think your mower deck lift assembly spring has fallen off. The spring came off because the deck lift adjustment screw must have been unscrewed to the point that the deck fell off. Cut and paste this address into your browser address bar. You will need to prop the deck up put the spring back on and screw the adjustment screw back together. Keep in mind the adjustment screw may have fallen off completely. http://www.partstree.com/parts/?lc=poulan_weed_eater&mn=PP12542J+Tractor&dn=0825730010
What oil do you use in a 1042 club cadet riding lawn mower?
You can actually use zippo lighter fluid I know it sounds weird but it does the trick
Where are the fuses on a huskee lawn tractor located?
ere are fuses on a huskee tractor
I want to remove the rear tire on a john deer LT155 riding mower and I'd like to know if the end cap is threaded or does it just pop off?
It is not threaded.
