If it's only the driver side door, it's most likely a wiring connection within the door. If NONE of the doors are opening with your fob, you'll just have to change the button battery inside of the fob.
Sounds like you need to replace the drivers door lock actuator.
If your front door lock make no noise when the lock/unlock is pressed on your keyless entry it's a very good chance the door lock actuator is not working and will need to be replaced. Est Cost $46 for the part and about $115-130 in labor.
By pushing the switch on the driver's side door panel that locks and unlocks the windows.
Is the remote's battery dead?
You can find keyless door locks for domestic properties at Go Keyless online. They sell remote dead bolt locks, remote door knob and remote lever handle locks. They are available to fit any decor in your home.
power door locks don't work on my 1997 Honda crv
The battery in the remote needs to be replaced.
This happened to both front driver & passenger side door locks on my GS300. Its the Actuator. The part is about $200(?) from Lexus and I believe that was the only place I could get it from. Now my backseat passenger side is going out :(
Try this: Turn the ignition to RUN (do not start), press the unlock button on the keyless remote, ignition OFF. Repeat 2x. Turn the ignition to RUN, press the unlock button on the keyless remote twice, the power locks should cycle to indicate successful programming. Turn the ignition OFF and test remote.
that is the way it was designed,it is a safety feature so ou can not lock keys in vehicle
They were an available option.
Check fuses