It was there as part of the process of making it.
Should be a threaded hole at either the bottom or rear of the radiator
Water will come out of the bottom hole faster than a hole at the top due to the force of gravity acting on the water. The bottom hole allows for a greater pressure difference, resulting in faster flow.
It's a threaded hole.
It could be a bad water pump if it's leaking out the weep hole at the bottom of the water pump.
The hole closest to the bottom of the bottle will spurt water the furthest. This is because pressure increases with depth in a liquid, so the water at the bottom of the bottle has the highest pressure and will spurt out with greater force.
anything without a bottom is not a hole, but a tunnel.
The motion of water will be spherical.
I suggest digging a large hole and put food, water and supplies at the bottom of the hole to interest him/her
Threaded inserts are installed securely and efficiently by first drilling a hole in the material, then using a tool to insert the threaded insert into the hole. The insert is then tightened into place, creating a strong and reliable connection.
theres a hole in the bottom of the sea theres a hole in the bottom of the sea theres a hole theres a hole theres a hole in the bottom of the sea
Because the pressure of the water is a lot stronger at the bottom of the water and a lot less strong closer to the surface of the water
The water will typically come out farthest from the hole located closest to the bottom of the cup. This is because the pressure of the water increases with depth, leading to a stronger force that pushes the water out of the lower hole compared to the holes higher up. Therefore, the hole at the bottom will allow water to shoot out farther than the others.