because they are cheap
can you change the alternator belt in a 1998 Chevy metro from under the car.
Just changed the alternator on my 2000 vw golf and now can't get the alternator belt back on - any suggestions?
Loosen alternator remove old belt. Reroute new belt, tighten alternator.
by being clever
The alternator belt on a 1998 Honda Civic is replaced by loosening the mounting bracket, disconnecting the wiring harness, and slipping the belt off the pulley. The alternator is then unbolted, removed, and a new unit put in place.
Dead easy, take drive belt off power steering pump. Slacken off alternator's two 13mm nuts, push down on spring loaded alternator, take off alternator belt, put on alternator belt. Reverse process. Job done
The alternator is rotated on it's pivot to adjust belt tension.
it the main belt on the side of the motor its on the right of the car
Remove the belt from your 1998 Chrysler Town and Country alternator. Disconnect the wiring from the alternator. Loosen and remove the alternator retaining bolts. Reverse the process to put the new alternator on.
You remove no pulleys. Just loosen the belt and then remove the alternator.
Remove the alternator belt from your 2000 Chevrolet Monte Carlo alternator. Remove the wiring harness from the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
Disconnect the 98 LeSabre battery. Remove the alternator belt. Remove the alternator wiring. unbolt the alternator, remove it, and bolt the new one on. Reconnect the wiring, but the belt on, then reconnect the battery.