I dont know because i dont have a Ford Check your brake light switch on the back of your brake pedal for adjustment.
the brake lights are on a separate cuircut,if your brake lights are staying then it will be a fault with the brake light switch. the switch is located under dash,and will be on or very close to brake pedal.
Adjust the brake switch which is above the brake pedal.
if you recenly replaced bulbs u may have installed them backwards they should be running lights and brake lights if this is the case they maybe installed incorrectly
are you sure it is the brake lights and not the tail lights. if it is the brake lights you most likely have a short some where. go to a auto eletrican It is the brake lights which turn on. Short in the switch or the wiring?
check brake light switch on brake pedal maybe getting bad
check the brake pedal, there is a switch on the back of the pedal that depressed when the brake is depressed that turns the lights on, when this is loose it keeps the lights on.
Could be the brake light switch above the brake pedal.
Only the front lights stay on for safety. You need to turn on your lights to get the back lights to come on. To turn off the front safety lights just push your emergency brake on one click.
somebody put a single filiment bulb in a dual receptacle socket or visa versa chech rear bulbs first
it's somthing under the brake pedal, it's sticking and just needs to be loosened. you'll also find when you press the pedal in, the brake lights will go off.
There is a piece behind the brake pedal that brakes, it is round and blue, but I do not know what the piece is called.
IT'S PROBABLY JUST A PROBLEM WITH THE PRINTED CIRCUIT BEHIND THE DASH.