After I switch gears in my 98 Saturn SC2 the gear 'slips'. Why?
if the engine isn't reved enough it will stall
Inhibitor switch reduces engine power to avoid shock while automatic transmission changing gears
Sounds like you need 2 get a new transmission!!make sure its not the netural switch heres how you test if its that if the car moves a little and your rev upto 5 then let go of the gas and see if the gear kicks in if it does that is the neuttal switch !
Typically this is caused by the load being removed from the engine, allowing it to rev faster and thus idle higher.
A bad torque converter can cause slipping gears. The fuel mileage will suffer as well, and the engine will rev higher.
You need to replace your clutch.
4 gears over 4 gears with a switch to switch between low and high 1234 then 5678
Rev Like to rev an engine
I think that happens when you are changing gears. If you make the engine goes to 3000 rpm and suddenly release the gas pedal and rapidly press down the clutch pedal. The rev would up. With very noisy sound. Isn't it?
The car could be jumping when you switch gears for a number of different reasons. You might need to replace something.
dont rev the engine to much dont rev the engine to much
Those two are not geared to production. The engine exploded because the transmission was not geared properly.