answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Why does the fan for heating and cooling only work on the highest setting in your 2001 Mercury Villager?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What one of these has the highest density Mercury or wax?

Mercury


The heating and cooling fan only works in the high position. Do I need to replace the fan or is their a sub electrical system connected?

Try the HVAC, it is Heating, cooling, AC, regulator. located near the blower motor. it controls the amount of voltage going to the motor, the highest setting by pass the restictors that is why it only works on high., Might locate one at a junk yard. good luck,


Which plant has the highest temperature?

Mercury


Which Planet has the highest uncompressed density?

Mercury


What is the highest point on mercury?

The highest point on planet Mercury is Caloris Montes. Its peak has an altitude of approximately 3 kilometers, or about 1.9 miles.


Do canned oysters contain mercury?

All oysters can contain mercury. They are one of the many shellfish that has the highest levels of mercury in it.


What is the highest day temperature in mercury?

It is approx 700 K.


What are the temperatures of mercury in Fahrenheit?

I know that the highest it can reach is 800.


Who has to highest singing voice?

Freddie Mercury and Mariah Carey.


If you have a gas home heating system which season will your gas bill be highest?

winter


If you have a gas home heating system in which season will your gas bill be highest?

winter


How do you get the air out of the cooling system?

Keep the overflow tank filled to its FULL line. Find the highest point in the cooling system; open it very slightly. Sometimes the highest point is the radiator cap. Sometimes the highest point is at a hose clamp. Very rarely there is a bolt that is meant to be loosened to let air out of the cooling system (example 1995 Mustang) You will hear air coming out. Keep filling the overflow tank. Then re-tighten the part that you opened. Also you will want to have the car's heater on HIGHEST/HOTTEST while doing this because the heater is connected to the cooling system.