that truck has 4 belts that may fit. 2 belts with ac 2 belts without. you need a size 55
Could be a bad throttle body
There is usually a sticker with a small diagram of the belt path on the fan shroud or somewhere near under the hood near the nose of the truck. You'll probably need a 3/8 or 1/2 extension and rachet to move the idler pully into position for slipping the belt in place.
4 by 6 in the rear and 6 1/2 up front
The 1995 GMC Sierra doesn't have kingpins.
a pully underneath the alternator moves with an end wrench. turn the nut clockwise and the belt will loosen up
Around 80 litres It might be that small if it is a 1500 series. What is yours, a 1/2, 3/4 or 1 ton?
Sine Sierra was created in 1995.
I belive that there is no adjustment on the serp belt on your lumina. Should be a spring loaded tensioner. If you are having problems with the belt slipping you most likely need to replace the belt/ tenssioner.
yes it will
Serpentine Gallery - album - was created on 1995-09-11.
how do i replace the maser cylinder on a 1995 GMC Sierra
The clutch may be slipping