COULD BE FRONT TIE ROD END
Have the front rotors turned on a lathe at a dealership. check brakes and rotors
your rotors on the front are warped. they need to be turned or replaced.
Warpped rotor. rotors are warped have them checked and turned or replaced. they should be turned after every brake change
No, the electronic steering has nothing in common with the brakes. If you have a warped rotors the fix is to remove the rotors and have them turned at a machine shop. Also replace the pads at this time, no matter how good they look.
Sometimes you can have a a pulsation while the brakes are adjusting after you have turned the rotors. You could wait a couple days and see if it corrects itself.
You have a warped rotor. Brake pads need replacing and the rotors turned or replaced.
The front brake rotors are warped. It's not the power steering pump if it only happens when braking. One or both of the rotors need to be replaced. Overheating causes this, especially if the rotors are old or have been turned as part of a previous brake job on the truck.
you need to have your brake rotors turned or even replaced, this is a 200.00 fix or so
the rotors
You replace rotors when they get too thin, or are warped. They may be to thin to be turned and still alright to use. Rotors do not "have to" be turned to put new pads on.
No they can be turned off the vehicle.
Bring to a shop that has an ABS scanner to determine the problem