answersLogoWhite

0


Best Answer
Copy

You might check to see if the rubber isolation bushings need replacing. They are located at the bottom of the shock and strut area of the wheels. Mine were red in color yours may be black or other. Inspect these bushings to see if they are showing wear.

User Avatar

Wiki User

โˆ™ 2011-10-18 21:07:41
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +5 pts
Q: Why does your 1991 Ford explorer make a loud clunking sound periodically?
Write your answer...
Submit

Related Questions

Will the transmissiom from a 1991 Ford Explorer fit a 1996 Ford Explorer?

The transmissions from 1991 - 1994 are the same. So the 1991 transmission will not fit a 1996 explorer.


What transmission is in a 1991 Ford explorer?

The automatic transmission is an A4LD in a 1991 Ford Explorer


When was Ford Explorer created?

Ford Explorer was created in 1991.


What size fuel tank is in the 1991 Ford Explorer?

I believe that is ( 19.3 U.S. gallons ) in a 1991 Ford Explorer 4 door


Same explorer 90?

The Ford Explorer was introduced in 1991. There is no 1990 model.


Can the lifters on a 1991 explorer be adjusted?

The lifters on a 1991 Explorer cannot be manually adjusted. However, since the Explorer uses hydraulic lifters, they do adjust themselves within a certain range.


What are the causes of hard starting a 1991 Ford Explorer?

The #1 cause of hard starting a 1991 ford explorer is having lost your keys


What is the fuel capacity for a 1991 Ford Explorer Eddie Bauer?

On the 1991 Ford Explorer , 4 door : I believe it is 19.3 U.S. gallons


Diagram for fuel system 1991 Ford Explorer sport?

why can't i find a diagram of the fuel system for a 1991 ford explorer eddie baur


Where is the Fuse panel 1990 1991 1992 Ford Explorer?

The Explorer was introduced in 1991. In the 1991 and 1992 Explorers the fuse panel is underneath the dashboard between the steering column and the driver's door.


What if your 91 firebird formula 5.0 has a clunking noise as the car speed goes below 30MPH If you press in the clutch before it drops below 30MPH the clunking noise does not happen?

If there is a clunking noise on a 1991 Firebird Formula 5.0 when going below 30 mph, and the clunking noise does not happen when the clutch is depressed, it is probably a problem with the flywheel. The flywheel moves freely when the clutch is depressed. When the clutch is not depressed, it could be that something is rubbing on the flywheel, like the clutch plate.


Will a manual transmission from a 1991 Ford Explorer fit a 1994 Ford Explorer?

I dont see why not.


What kind of engin does a ford 1989 explorer xlt?

The Explorer was introduced in 1991. There is no 1989 model.


What year did Ford make the explorer?

Ford started manufacturing the Explorer in 1990 as a 1991 model


In what year was the Ford Explorer first introduced?

1991


How many gallons of gas does the 1991 Ford Explorer take to fill it up?

I believe the 1991 Ford Explorer 4 door holds 19.3 U.S. gallons


Who won the Oscar for Sound in 1991?

Terminator 2: Judgment Day won the Oscar for Sound in 1991.


What could be the cause of a crisp clunking sound in the right-front of a 1991 T-Bird when sometimes going over a bump or steering left or right or hearing it with each quick pump of the brake pedal?

CHECK FOR WORN BUSHINGS ON THE STABILIZER LINK ENDS.


Would a 1990 Ford Explorer transmission fit in to a 1994 Ford Explorer?

The Ford Explorer was introduced in 1991. There are no 1990 Explorers to take a transmission from.


Can you put a 1991 Ford Explorer motor into a 1998 explorer?

If you use the motor mounts off of the 1991 explorer also, it will fit and transmission should line up if it is same size motor. If going from a automatic to a standard, you will have to replace the flywheel.


What type of tranny is in 1991 Ford Explorer?

www.everdrive.com will tell you


Plug gap for 1991 Ford Explorer?

.054 inch


Who won the Oscar for Sound Editing in 1991?

Terminator 2: Judgment Day won the Oscar for Sound Editing in 1991.


Can you put exterior door handles form a 1995 Ford Explorer on to a 1991 ford Explorer?

If it fits it should work


Where is the chassis control model on 1989 Ford Explorer?

There were no Ford Explorers in 1989 - the first model year of the Explorer was 1991.