0
Why does your 94 16 valve Tracker idle fine accelerate fine but has a rhythmical miss at cruise All new ignition components have not fixed this?
Wiki User
∙ 14y ago
you might try having the injectors cleaned Have your valves checked! I had the same problem with a 1992 Geo Tracker, the exhaust valve on the #3 cylinder was stuck too tight! The mechanic adjusted all the valves, and the problem went away. You will have to get a compression test to cofirm this.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Will a 2001 ignition switch fit the 2000 Chevy Tracker?
Yes, the 2001 ignition switch for a 2000 Chevrolet Tracker will fit just fine. Other years the switch fits are 1999 to 2004.
How do you change the ignition lock cylinder in a 2001 Chevrolet Tracker?
To change the ignition lock cylinder in a 2001 Chevrolet Tracker, first disarm the air bag system. Then remove the clock spring assembly to be able to remove the old ignition lock cylinder and replace with a new.
Do the headlights come on at ignition on a 2007Geo tracker?
If it's like a 1996 tracker the headlights won't come on unless the parking brake is released or the light switch is on.
How do you set the points on a 1992 Geo Tracker?
O-Boy !! The engine has electronic ignition. *** NO POINTS ***
What is the knocking noise from your 2000 Chevy Tracker that gets louder when I accelerate?
you probably threw a rod out, get it to a mechanic ASAP or you will have more problems.
When you accelerate hard your car just splutters but fine after 2000 revs why?
If your vehical is a tracker and you just put the timing chains in, it was done wrong
1990 Geo Tracker 4x4 and it misses when you accelerate why?
could be a clogged injector, a bad coil or a bad hall-effect switch in the distributor
1996 geo tracker won't start. The fuel pump is ok tps changed could it be something in the ignition?
check for the 4 thing you need for a engine to start, fuel, spark, air and compression. if any of these are not present then trace back the components to see what is broke.
Would a ignition switch from a Geo Metro fit a Geo Tracker?
depends on years storm and tracker are more closely related call parts house and compare part numbers
How do you time a1995 Geo Tracker?
ignition timing or cam timing. see my profile for link. answers both.
How do you change Geo Tracker distributor?
see my profile see link. click , maintenance then ignition timing. behold
What mark do you set the timing on a 1996 Geo Tracker e or i?
e is for the exaust stroke......i is for ignition stroke......i is the one you are looking for
