0
Assuming the starter motor spins but doesn't engage to turn engine over to start you could have a bad starter drive which is part of the starter assembly or possibly damaged/missing teeth on flywheel ring gear. Depending on year and model vehicle, some starters you can replace just the starter drive otherwise you need to replace the whole starter.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Why doesnt starter engage on 1996 Saturn?
What do you mean when you say it doesn't engage? Is the starter spinning but just doesn't catch to spin the engine? IF that's the case it could be as simple as a loose starter or as bad as a damaged flex plate/flywheel. But it would most likely be the starter.
Why doesnt starter engage always with new starter and flywheel?
Some vehicles require "shims" to be installed when a starter is replaced so the Bendix drive will engage the pressure plate teeth. If the starter is too far away from the teeth on the pressure plate, the vehicle will fail to turn over.
1991 gmc van that will not start the battery is fine and the fuel pump turns on with the key and the battery but it just doesnt even engage the starter could the starter or ignition be out?
Most often it is the starter and not the ignition.
03 Tahoe and dat starter is engage and it will not crack?
Replace the starter
Buick Skylark 1996 The starter willnot engage the flywheel the starter spin only?
The starter drive has broken, replace starter.
97 mercury mystique starter will not engage?
If the starter spins but won't engage, then the Bendix is not engaging the flywheel. Remove the starter and test to see if the Bendix thrusts out, and check to see that the flywheel does not have chipped teeth.
Ford starter motor turns but doesn't engage engine and the flywheel and starter are fine what next?
thanks how many holding blots and where bad bendix (starter drive) if the spring in the starter bendix is weak or broken it will not engage the flywheel; but the starter will turn normally. bad thing is ,you have to pull the starter..good luck..
What causes the starter not to engage periodically on a 1998 ford expedition?
starter motor need overhaul
Toyota Previa stater motor won't engage?
Toyota previa starter motor wont engage
Two functions of a solenoid fitted to a pre engaged starter motor?
1. To engage the starter with the ring-gear on the engine before the starter is turned on. IE to "pre-engage" it. 2. To turn the starter on once it is Engaged. This prevents/reduces damage to the gear-teeth on both the starter and the ring gear.
What would cause the starter to engage without the key when you hook up the battery?
Starter selenoid no good
How do you test a starter on car while starter is out of car?
Aplly battery voltage to it, it should jump, engage.
