Look at the wiring bundle that feeds the headlights. The wires will eventually break because of the constant up & down flexing of the wire bundle (motorized hidden headlamps). The problem will likely be found within inches of where the bundle is secured to the inside of the popup headlight carrier (where the flexing would be concentrated).
You probably have a faulty headlight switch. Replace it and that should fix it. Been there, done that.
I had mine replaced (2004 Accord V6) at a Honda dealer and the total was $3,500. Honda paid $2,500 of this even though it was out of warranty. Call Honda, as it does not hurt to ask.
OEM ones? or Aftermarket? I doubt it though since the reverse lights are on the bottom on the 01-03, there are wiring differences. Umm I have a feeling they will, if there are wiring problems it would be pretty easy to do a legit Mod to get them in Actualy they fit, fisicaly are the same, just have to do some electric change but is not a big deal.
not with just your daytime running lights. but when you turn your park lights and low beams on, it should light up. not that big of a deal though
Don't know. A 2004 Accord has one, though.
bad or wrong bulds....bad connections at the grounds...etc...you can find wiring diagrams at the library.:)
No it does not. You can add it though.
You have what is called a back feed, where you have wires striped and touching. So start at the lights and start to trace the wires until you find the exsposed wires. This might take some time though.
Maybe you have a security system? If you do, as soon as you hook up the battery, it will engage and your lights will flash. You will have to disable it in order to make it stop.
replace brake light switch on brake pedal if it hasn't been done try that
we can i don't know if we are though.... its hard to answer..... we will just have to wait and see.
The lights are controlled though the control board which will have to be replaced, have seen this many times before, this board is part number (NNN) NNN-NNNN and cost about $175 so i can't tell you what to do but i would wait until more needs done before replacing the board just for the lights.