0
Why field producing winding of 3 phase induction motor made stationary?
Wiki User
∙ 9y ago
Because the motor is much simpler and easier to design when the electrical power is supplied to the stator, while the rotor is a short-circuited copper cage. It allows the motor to work with no commutator or slip rings, so induction motors are quiet and have a very long life.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
What happens if field winding of a running dc shunt motor suddenly breaks open?
when the field winding of a running dc shunt motor suddenly breaks open the motor fails to run because in the motor the stationary winding is armature and rotatory is field winding
Why field winding work as stator and armature winding as rotor?
No, these can be switched depending on the requirements of the application. It is more practical to have the armature windings (since they will carry the full load current) as the stator for this will require larger wires and is also easier to cool if kept stationary. The field windings do not carry the full load current of the load so this requires smaller wires and smaller slip rings since this is the piece that will rotate.
Will a generator work if the wire is not spinning but the magnet is?
Yes. One winding/magnet must spin. Some generators have two windings, one is stationary (the stator), and the other spins (the rotor). One of these windings is energized, making it an electromagnet (called the field winding). In most generators of this type, the field winding is the one that is spinning. This is due to the fact that the stationary winding is the actual output of the generator, thus experiences high currents - and it is easier to pass these high currents through stationary busbars to the grid as opposed to rotating equipment.
What are field windings and armature windings in a dc motor and generator?
generators have two types of winding , * at armature also called armature winding( winding around shaft , we can say), which is the moving part. note that armature also consists of magnets along with windings. hence produces field arount it. * and at stator also called field winding, because when armature rotates its flux(field) is cutted by the stator windings and produces mutually induced e.m.f in it( in stator windings off course) causing current to flow. this current also produces some electric field around it which is in return cutted by the armature windings hince a little amount of e.m.f ( also called back e.m.f) produced in armature due to stator winding current. know this current in armature (due to back e.m.f produced by stator winding) produces additional field , hence causing more current in stator winding. this is the reason that why stator windings are called field winding( as they cause electric field of armature stronger and cause more current in output). note that out put is taken from the stator windings in generators.
Why armature winding resistance is less than field winding resistance?
An 'armature winding' is the rotor winding, and the 'field winding' is the stator winding.
Why you have to connect DC supply to the induction motor?
To start an induction motor we have to excite field. The excitation is done by connecting the DC supply to the field winding's.
What happens when ac is given to dc machine?
when we give d.c to an a.c motor i think there will not producing rotating magnatic field in case of induction motor so it never rotate and another dangeres issue is that there will burning of stator winding because constent flux producing in here so it does not link rotor winding
What happens if field winding of a running dc shunt motor suddenly breaks open?
when the field winding of a running dc shunt motor suddenly breaks open the motor fails to run because in the motor the stationary winding is armature and rotatory is field winding
When will a synchornous motor acts as an induction motor?
If there is an extra winding called the "damper winding" in addition to the field winding.Then the synchronous motor will operate as a squirrel cage induction motor.Whats is a damper winding ?A damper winding is made up of copper bars which are placed in the slots in the pole faces of the rotor.These are short circuited with the help of end rings in a squirrel cage induction motor.
What is the difference between a field winding and an armature winding in any machine?
simply saying u that field winding is a winding present at the stator of the motor and is used to produce the magnetic field and the armature winding is the winding present in the rotor and is used to rotate the shaft of the motor. there are some machines with permanent magnets, those permanent magnets are used as the major source of magnetic flux in the machine instead of the field winding .
Why field winding work as stator and armature winding as rotor?
No, these can be switched depending on the requirements of the application. It is more practical to have the armature windings (since they will carry the full load current) as the stator for this will require larger wires and is also easier to cool if kept stationary. The field windings do not carry the full load current of the load so this requires smaller wires and smaller slip rings since this is the piece that will rotate.
Will a generator work if the wire is not spinning but the magnet is?
Yes. One winding/magnet must spin. Some generators have two windings, one is stationary (the stator), and the other spins (the rotor). One of these windings is energized, making it an electromagnet (called the field winding). In most generators of this type, the field winding is the one that is spinning. This is due to the fact that the stationary winding is the actual output of the generator, thus experiences high currents - and it is easier to pass these high currents through stationary busbars to the grid as opposed to rotating equipment.
What is function of a stator in alternator?
The stator is the stationary winding assembly that makes the magnetic field inside the alternator. It is this magnetic field that the armature rotates in generating the electricity.
How does a transformer uses induction to transform current?
at first it comes from the source then go to the winding of coil and inside the coil voltage was reduce by magnetism and with this current still flow due to magnetic flux and then come out ti the second winding
Why is current in field winding of rotating electrical machines always dc?
Because with DC stationary field w.r.t. rotor can be easily created,and permanent pole can be created.
Do induction motors work on the transformer principle?
Didn't work.because primary and secondary winding not in motorAnswerYes. The rotor behaves as a rotating secondary winding -i.e. there is no electrical connection between the field windings and the rotor.
What are field windings and armature windings in a dc motor and generator?
generators have two types of winding , * at armature also called armature winding( winding around shaft , we can say), which is the moving part. note that armature also consists of magnets along with windings. hence produces field arount it. * and at stator also called field winding, because when armature rotates its flux(field) is cutted by the stator windings and produces mutually induced e.m.f in it( in stator windings off course) causing current to flow. this current also produces some electric field around it which is in return cutted by the armature windings hince a little amount of e.m.f ( also called back e.m.f) produced in armature due to stator winding current. know this current in armature (due to back e.m.f produced by stator winding) produces additional field , hence causing more current in stator winding. this is the reason that why stator windings are called field winding( as they cause electric field of armature stronger and cause more current in output). note that out put is taken from the stator windings in generators.
