I am having the same problem, and I don't know the answer. Logically, the belt was threaded incorrectly, one of the spindles is not turning easily, or a gremlin is on the loose. In any case, I need to get another belt. This last one lasted only ten minutes or so. :-(
Check for lose bolts on spindle mounts , all bearings , bent pulleys, rope or other debris around shafts or it could be low grade belts.
Hope this helps.
deck belt replacment for a 1998 cubcadet 1525
No the drive belt and Deck belt are two different belts, one powers the rear wheels, the other powers the deck. though if you are asking if they are the same belt as in same size, I don't know, you'll have to check your owners manual or talk to someone who repairs or can get parts for Cub Cadet mowers.
what model and which belt? If it is a 1000 series you have a transmission drive belt and a deck belt. I you have a 2000 series or higher or a cub cadet with an IH logo then you only have one belt the deck belt and no drive belt you have a drive shaft. So the model of the tractor and what belt needs to be given before the correct answer can be given.Phil
The drive belt on a Cub Cadet LX1040 is adjusted by turning a small bolt on the side of the cutting deck. It loosens or tightens the belt depending on the direction it is turned.
It's right on the deck
The 3000 Series Cub Cadet supposedly have no belts, not transmission belt nor deck belts.
what is the meaning of deck cadet in merchant navy
You won't. Once they twist once, it keeps happening. You'll need a new belt
You will need to order a manual on the mower from the manufacturer (I assume Simplicity).
the deck is the upper level of the vessel
Can you please provide more specific information or context about the deck cadet exam question?
Take the deck off. On top of the deck is the belt diagram if that is the one you were wanting. Here's a tip: Check the pulleys and the back of the belt will ride on what is called a flat idler (flat part) and the inside of the belt will ride on a "V groove idler". If you take this into account it will be easier to install your belt.