Possibly you need cyanuric acid to stabilize the pool. Available at the pool shop. Try adding some 12.5% liq. chlor plus the above product.
No. You can make it alkaline by adding ammonia and thereby liberating free chlorine which will be seen as a green gas which is irritating to the mucous membranes. Not recommended.
Well, if you mean chlorine gas (an element) adding an acid (which would usually require bubbling it through the acid) won't do much in most cases (but could depend on the specific acid).But, if you mean chlorine bleach (the compound sodium hypochlorite) adding an acid to it generates toxic chlorine gas.The simple answer is yes you can, but the smart and safe answer depends on which kind of "chlorine" you mean, where you are doing it, and if you want to generate toxic products or not. I definitely recommend against adding acids to household chlorine bleach!
No, you buy a new one.
You can add liquid chlorine by walking it around the outside edges of the pool or adding 3 inch tablets through a chlorine floater.
Yes definitely. it is wise and can save you up to 80% of chlorine required by adding stabiliser (cyanuric acid).
Do you mean that adding a little chlorine made the reading go from 0 to a higher level? You should shock your pool once a week with 1L of liquid chlorine per 10000L of water in your pool. You need to add enough chlorine to break apart the combine chlorine (the combination of chlorine and dirt which doesn't sanitize.) If you don't add enough at once, it will be used up and the chlorine reading will remain low.
No. You can make it alkaline by adding ammonia and thereby liberating free chlorine which will be seen as a green gas which is irritating to the mucous membranes. Not recommended.
The chlorine is reacting to minerals in the water.
Yes
its the cleaning
No, you do not have to change the water but you do need to wait until the CL reading is 0 before adding Baquacil or there will be a reaction and the water will turn green.
Chlorine will dissipate after a couple of days of its own accord the only way to keep chlorine in is to keep adding it.
. All water is chlorinated by adding chlorine gas to it or by adding calcium hypochlorite or sodium hypochlorite. The term "chlorinated water" is misleading, as the final product is not chlorine, but a dilute solution of hypochlorous acid.
Everythging works better when the balance is correct, but you do not need to correct the pH before adding chlorine. Just keep an eye on it.
A grayish coating is formed.
Chlorine kills many microorganisms, including bacteria, that can cause disease.
Well, if you mean chlorine gas (an element) adding an acid (which would usually require bubbling it through the acid) won't do much in most cases (but could depend on the specific acid).But, if you mean chlorine bleach (the compound sodium hypochlorite) adding an acid to it generates toxic chlorine gas.The simple answer is yes you can, but the smart and safe answer depends on which kind of "chlorine" you mean, where you are doing it, and if you want to generate toxic products or not. I definitely recommend against adding acids to household chlorine bleach!