0
The valve gap has to be checked when the rocker arm is on the "bottom" of the cam eccentric. This means that the cam has to be rotated as you check each valve, to get a correct reading. There can be variation in the valve gap due to uneven wear, but in a well maintained vehicle, this should be a very small variance.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Why the clearance of gap exhaust valve is big than intake valve?
The exhaust valve gets hotter than the intake valve.
What is the valve gap on a 1999 Yamaha wolverine?
what is the valve gap for a 1999 Yamaha woverine
What is the valve clearance of a Honda GX35 engine?
For the intake valve, the gap is 0.08 ± 0.02 mm. For the exhaust valve, the gap is 0.11 ± 0.02 mm.
How do you do Valve adjustment 93 Taurus sho?
Requires more skill than the average do-it-yourselfer has. You must remove the upper intake manifold and valve covers then using a Ford kit which contains various shims in various thicknesses, measure the gap between valve and can lobe and install the correct shim on top of the valve to bring the gap back to specs. In other words....Pay the 500 bucks and take it to a Ford mechanic.
What is the valve gap on a 15.5 briggsstratton?
OHV valve gap is 0.006" There is a YouTube video on the adjustment procedure and I will put the link below.
What is the spark plug gap for a Fiat Punto 1.2?
If it's an 8 valve engine and not the 16 valve: Bosch Spark plugs have a gap of 0.8mm NGK spark plugs need a gap of 0.9mm 16 Valve engines have a 0.9mm gap on each type of spark plug
Would a 14 year old date a 12 year old?
Its quite a gap, but yeah If you like each other than It could happen, trust me I've dated with much bigger gaps than that:)
Why do the rockers make noise?
Because the gap between the rocker and the valve is too big and what you hear is the rocker slapping the valve stem. Get yourself a manual for your car and find the valve gap so you can adjust them properly.
How do you set valve clearance on 3hp Briggs and stratton side valve?
Remove cylinder head, Remove valve side cover, Remove valve springs to free valves, Measure gap between end of valve and cam follower, while pushing valve onto seat with finger, To make gap larger, pull valve out and grind some metal from end with bench grinder, (carefull here), When gap is correct and valve seats without turning under finger, Reassemble.
2004 VW 1.8 spark plug gap?
The 1.8 20 valve Turbo gap is 0.032
What is the gap size on a 1984 xr80?
it depends on which gap you are measuring, spark plug gap should be .6-.7mm, intake valve gap is .05mm exhaust is .05mm, point gap is .3-.4mm
What gap setting is required on a Briggs stratton 12.5 hp engine?
The gap is 0.30. It is on the owners manual ? 10-28-08 That sounds like a spark plug gap. Other specs: Armature air gap: .008-.012 Valve/tappet: .004-.006 intake AND exhaust, cold.
