answersLogoWhite

0

Why is rf modulator needed for tv and vidio recorders?

Updated: 8/18/2019
User Avatar

Wiki User

13y ago

Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Why is rf modulator needed for tv and vidio recorders?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Does a N64 have to have a RF modulator to use a RF switch?

Yes, a modulator is required if you use a RF cable to connect it to the TV.


Where online can a Philips RF Modulator PH61159 be purchased?

A Philips RF Modulator PH61159 ca be purchased online from Amazon. Also, many online retail websites such as Walmart and Sears carry the Philips RF Modulator PH61159.


How do you hook up a home theater system to an old TV and RF modulator?

The video out from whatever source you have will go into the RF modulator which then screws into the back of the old TV.


What is an RF adaptor?

RF Modulator - Convert video and stereo audio from an A/V component into a coaxial cable output Try radioshack.com


How do you change the video on a Sony TV?

by un plug Rf -modulator which is seen on back side


Why is your RF modulator not working?

You need to describe symptoms. Check oscillator frequency and power supply.


How do you convert s video to composite video?

You need a RF modulator to convert the signal to a (RF) TV channel. The audio and video quality will be lower doing this.


What is a modulator along with a VCR?

Television signals are transmitted on a high frequency (or RF) carrier signal. The technique of adding the signal to the carrier signal is called modulation. This happens for all radio transmissions. A VCR that has a modulator allows the output signal to be turned into an RF signal. The signal is added to the RF signals that are fed into the VCR via the aerial feed. Although it is rarely needed today, older televisions often had no video or audio input so the VCR output could be sent to the television as RF to allow the tuner to capture and display the signal. Most VCR modulators have a control to adjust the carrier frequency to allow it to use a channel that is not use by other broadcast television signals. Modulators are used less often in recorders and players as virtually all televisions have at least one video input.


Is there an rf modulator that has ypbpr ends intead of regular yellow white red?

As rf modulators are usually mains powered convention says the standard cabling is easier to get


What is a rf modulator?

An RF modulator is a device that converts video and/or audio into radio waves for use with a television set. In the 1980's, many computers were produced which could be attached to an existing television set. If you were not using a separate monitor, then you'd need an RF modulator to convert the signals of the computer to work with a television. Nowadays, with the new television sets, such converters are no longer necessary, since most televisions now have some of the most common computer connectors and can attach directly using the correct cables.


What section of a transmitter impresses the audio information on the radio wave?

AF modulator. Audio signals produced by the microphone get amplified enough with the power to modulate the RF carrier wave generated by a RF oscillator.


Why is radio frequeny choke used in high level modulating circuit?

Because the output circuits of the modulator would otherwise present an impedance to the RF amplifier in parallel with the transmission line and antenna system, which you don't want. In other words, you want the RF all going up the tower, not down to ground through the modulator.