Mexican spec.
Look underneath the drivers side of the front bumper.
Front signal bulbs on a RSX are changed from the engine bay. Find the lightbulbs for the signal bulbs located towards the bumper of the vehicle. Pull them out and replace them.
right behind the bumper! yes- to change it you have to take off the whole front of the car! crazy huh?
The 1973 ventura had a hole in the bumper for the front signal light, the 1974 had a slit in the front bumper with the signal light at the edge
There are two horns behind front bumper on each side in between turn signal lights.
First you have to take off the front bumper. Then there are three screws you will have to undo in order to take out the entire headlight housing to then get to the turn signal.
It should be behind the front bumper, in the front part of front left bumper.
This is the turn signal bulb in the front bumper - passenger's side.
If you look at the front grill, below the bumper, the small bulb like sensor is snapped into the lower drivers side there.
It is where the tow hook threads in.
The horn is located behind the front bumper on the driver side. Simlpy remove the bumper. its right there once you remove the bumper
behind the drivers side front turn signal in the bumper