There is no transmission light on a LHS.
No.
Through the transmission dipstick where you also check your levels. You will need a small funnel that can be purchased at your local auto parts store.
There are four oxygen sensors on the 1997 Chrysler LHS. 2 before the catalytic converter and 2 after.
1996-1997 Dodge Intrepid, Chrysler Concorde, Chrysler LHS, Eagle Vision.
The 1997 Chrysler LHS typically requires about 6 to 8 quarts of transmission fluid for a complete fluid change, including the torque converter. It's always best to consult the owner's manual or a service manual for the exact specifications and to ensure proper maintenance. When checking the fluid level, make sure the vehicle is on a level surface and the engine is running.
The solenoid pack on a LHS is inside the transmission on top of the valve body.
A Chrysler LHS does not have an inertia or reset switch.
Passenger side is bank one on a LHS.
To reset the ABS light on a 1997 Chrysler LHS, first ensure the vehicle is in a safe location and turn off the engine. Disconnect the negative battery cable for about 10-15 minutes to clear the ABS system's memory. After reconnecting the cable, start the engine and check if the ABS light has turned off. If the light remains on, it may indicate an underlying issue that needs to be diagnosed.
ATF+4
If you look strait at the headlight on the turn signal side you will see a small screw. remove it and the light should come out.
It is the sensor in the transmission that reads the shifter position and transmits it to the transmission computer.