My friend is having the same problem. After some research, I've come down to it being related to the idle switch on the pedal assembly. The switch is there because your throttle is electronically controlled and the switch is a canceller. If you release the throttle but the throttle position sensor is messed up and saying that there is a throttle input the truck will try to keep revving. So the idle switch cancels any signal that is being put out by the throttle position sensor. If the Idle switch sticks, it will cancel out your input into the throttle pedal. So when you want to go, the idle switch thinks that your still in idle mode. In a nut shell, people are saying that you need to replace the throttle pedal assembly. It's relatively easy, kind of expensive though. About $220.
When the check engine light is activated the resricted performace message which is like a "limp home mode" to work with the fault the vehicle will restrict timing, trans operation and throttle body response
Check for a floormat catching on the accelerator. If not the floormat, usually is a mis-routed cable where it comes out of the cable jacket and loops around the throttle shaft. This will hurt you or your engine if left alone-- please fix it quickly. You can check throttle operation with engine off.
The ECU enhances throttle response and the transmissions shifts a bit more aggressively. It is completely safe for both the engine and transmission.
why do check engine light comes on
A throttle body is were the throttle plate is witch allows air into the engine. so you get the air fuel mixture the engine needs to run. The futher the plate opens the faster the engine runs. you can find this were the air intake hose comes from the air filter box then connects to the engine. That will be the throttle body
check your camshaft sencor and your crankshaft sencor.
No, the check engine light comes on when the computer detects a malfunction and sets a code.No, the check engine light comes on when the computer detects a malfunction and sets a code.
The check engine light comes on at start up for a bulb check. If it stays on with the engine running the computer has detected a malfunction. You need to have it checked for codes.
Check the engine oil, sometimes when the oil is low the check engine light comes on while sitting still and goes out when you accelarate.
It is the bottom sensor on the right side of the throttle plate housing. That is the part that all the duct work comes from the air filter box and hooks to the engine is.
Maybe, the check engine light comes on when the computer detects a malfunction and sets a code.Maybe, the check engine light comes on when the computer detects a malfunction and sets a code.
You can buy the check engine computer and the book comes with it. I know, I bought one. When your check engine light comes on, you plug it in and check the engine and it will give you the code and you look in the book for that code and it gives you the answer.