Auto Parts and Repairs
Toyota Camry

Why might a 1988 Camry not start if it usually starts powerfully and is not making any sound?

444546

Top Answer
User Avatar
Wiki User
Answered
2005-12-28 05:28:20
2005-12-28 05:28:20

check for a full 12 volts at the batery and then at the starter. then check fuses then the starter its self and the last thing check the ignition switch

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


In 1997 Camry and Corolla makes did not offer a wagon body style.

It is usually written on the compressor.

Dirty or failed idle control valve or carbon deposits in the throttle body.

The fuse for the heating and air conditioning for the Toyota Camry 2000 is usually used to break the circuit whenever there is an overload. The fuse is usually an AC fuse.?รฆ

If you VIN number starts with "J" it means it was produced in Japan. If it starts with a number it means it was produced either in Canada, Mexico or US.

After 50.000 miles or so. Also if the car starts to use more fuel than is normal, or if the engine starts to lose power or if the engine starts to get too noisy.

Use "regular" gas - usually 87 octane.

Usually Toyota uses 5 nut scheme.

Usually map sensors have to be replaced and cannot be repaired.

The neutral safety switch is either not adjusted properly or is defective

Toyota Camry does not have adjustable valves. If valve clearance is not proper you need to replace the valve shims with appropriate sizes (usually different for each valve).

Yes, you can get 2008 Toyota Camry LE Hybrid, but it needs say so somewhere on the car (usually on the trunk, there is a sticker for it). Otherwise, it is not hybrid.

When making changes to the engine of any car, it comes in handy to know the firing order. A 1995 Toyota Camry has a firing order of 1-3-4-2.

It's between the battery and the exhaust system, usually it has an yellow handle.

Usually if it's not serious, check the cooling system hoses.

well i just had mine done and it was $260

In the engine ... usually on both sides or inline on the top.

Usually such sensors are located in the rear bumper.

Usually ambient sensors are located in front of the radiator.

Timing chain is usually replaced at 200K.

you will most likely need to change the spark plugs

bulbs toyotaAnswerto fix the Camry brake light--first try to change the bulb--this is usually accessed through the trunk--usually requiring a Phillips screwdriver-any parts store has the bulb...take the bulb with you to the parts store

where is the thermostat for a 92 Camry located? where is the thermostat for a 92 Camry located? where is the thermostat for a 92 Camry located?


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.