0
Why must you keep your fingers away from the needle on the sewing machine?
Wiki User
∙ 15y ago
When you sew, your finger can get caught in the sewing machine if you get too close and that could lead to serious injury, for starters, the cutting and pulling of the skin.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What are safety features of a sewing machine?
Make sure to set your machine on a stable surface.Pay attention to what you're doing.Do not sew over straight pins.Keep your fingers away from the needle!unless you want to bleed to deathTurn off the power off when you have finished.Always check that dials are set correctly.Test stitch on a scrap of fabricLower presser foot before machining.Ensure that the needle is in the highest position before removing.Turn off the power when threading the needle and changing the bobbin.Keep hair tied up.One person to every machine.Fingers away from needle.Ties tucked in.
What is jamming in sewing?
When someone experiences a "jam" while sewing, this usually refers to their sewing machine "jamming" or locking up.A sewing machine has many moving parts. These can jam when fabric or thread gets caught in the parts, preventing them from moving. When the machine jams, it often makes loud straining or clicking noises as the gears attempt to keep moving.If your sewing machine jams, immediately stop sewing. Carefully move your fabric out from under the needle. If the sewing machine jams with the needle down, carefully jiggle the fly wheel (the hand crank on the right side of the machine) back and forth to loosen the threads. This usually works, and allows you to lift the needle. Clip the threads, and move your project out of the way.Unthread the machine by removing the top thread and the bobbin. Look for any stray threads in the bobbin housing, and remove them. Carefully rotate the fly wheel to check for any obstructions. These obstructions are usually around the bobbin and under the needle. If the fly wheel rotates fully without catching, then the obstructions have been cleared away. Re-thread the top thread and bobbin, and continue sewing.Jams usually happen when the sewing machine is not threaded properly. Make sure that your top thread follows the proper path, and is fed through the tension disks at the top of the machine. Check your sewing machine manual to make sure that the thread feeds off your bobbin in the proper direction.If you are still having problems with jamming in your sewing machine, oil the machine and replace the needle. The needle may be bent or have a bur that is causing the thread to catch, creating the jam. If, after re-threading your machine multiple times, oiling the machine, and replacing the needle, you still have problems with the machine jamming, take your machine in for service. The service tech will be able to find any problems and bring your machine back to working order.
Safty on a sewing machine?
There are some safety features on sewing machines. For example, some stop working if the presser foot is not down or the electrical is not hooked up correctly. You should take precautions yourself, such as never leaving the machine on around children and keeping your hands away from the needle.
How do you use a sewing machine safely?
In order to use a sewing machine safely, you need to be attentive. Keep your eyes on the needle and keep your hands away from the moving machanism. If you do not know how to use a feature, especially one that involves changing out parts, read the directions carefully first.
Which sewing machine comes with the most needles?
Singer sewing machines come bundled with a set of needles so you get start sewing right away!
What is the use of a sewing machine?
How to thread a sewing machinePlace the presser foot in the upward position.Place a spool of thread on the spool holder.Traveling from the spool holder, across the top of the machine, look for a minimum of one thread guide.Insert the thread in the thread guide(s).Now look for a tension mechanism. Bring the thread downward to the tension mechanism, slip the thread between the metal disks of the tension mechanism, and travel back upwards with the thread.Look for a take up mechanism. This is the area on the front of the machine which will go up and down, when you turn the hand wheel. Place the thread through the take up lever. Some machines are set up so the thread will slide in to this, others require you to place the thread through a hole.Now the thread will go downward on the left side of the take up lever.Locate and thread any thread guides, leading down to the sewing machine needle.Thread the sewing machine needle. Hold the thread with your left hand and turn the hand wheel.
How do you care and store the sewing machine?
It's good to have it tuned up regularly at your local sewing machine/vacuum repair shop. Annual tune-ups help elongate the life of your machine.At-home maintenance is important as well. After a big project, take your machine apart:Clean the outside of the machine with a small brush (you can find brushes specific to sewing machine cleaning at a fabric store or sewing machine shop).Remove the needle and sewing plate.Take the bobbin out, and remove any parts that are easily removable.Clean out the fibers that have collected with the small brush.Use an airduster to remove the small fibers, but be careful to point the air AWAY from the machine, rather than blowing the fibers further INTO the machine.When storing your machine, be sure to keep it covered with a cloth or hard cover. This will shield it from dust and dirt. Store it in a cool, dry environment, and don't store anything on top of it.
How do you dispose of old sewing machine?
You could sell it. Try ebay. Or you could just give it away or throw it out.
Are there any modern, small, easy to use sewing machines that I could give to my daughter to use when she goes away to college?
The Sew Easy Mini Portable Sewing Machine would be a great choice.
I am new to sewing and I am looking to buy a sewing machine. What qualities should I look for in a good sewing machine?
There are many different types of sewing machines. You have the different brands such as Bernina, Brother, Janome, etc. You can buy sewing machines that specialize in quilting, dressmaking, etc.
How to Service Sewing Machines?
Taking good care of sewing machines will help them to give excellent service for many years. Perfect stitches and speed depend on the ability of the movable parts to function freely. Dust and lint from materials, mixed with machine oil, can cause the machine to stitch poorly and slowly. Loose screws or a worn-out belt can also cause problems. Unless it has a broken part that you cannot replace, you should not replace your machine due to simple problems that can be fixed. All sewing machines come with a screwdriver and a bottle of oil, which are the basic tools to service a sewing machine. Open the machine and learn how it works. By knowing where adjustable screws are, you will be able to maintain their tension if any become loose from excessive oiling or vibration. If the machine is skipping stitches or not feeding the material properly, something is wrong and it’s time for servicing. Cleaning is the main job when servicing sewing machines. The screwdriver and a piece of cloth are all that you need for this job. Remove the needle, the pressure foot and the throat plate which covers the bobbin area. Dust and lint regularly accumulates in the groves of the feed dog and around the bobbin holder. Cleaning these areas will allow the machine to feed the material to match the speed of the needle for perfect stitches. Check for loose screws and clean any dust or dirt from other areas. Finish by placing a few drops of sewing machine oils in oiling holes. Do not oil excessively and keep oil away from the belt. Sewing machines are important in the lives of most homemakers and people who love sewing. This skill can help them save or earn money. Alterations and mending are quick and easy when the machine is working properly. Keeping it well service will making sewing hassle free every time and the user will be encouraged to sew.
What are the risk assessments for a sewing machine?
Finger/body item being injured by needle: Use caution; keep unnecessary contact at a minimum, use as instructed: Medium riskTie/hair getting trapped in mechanism, resulting in serious injury: Keep hair tied back; ties tucked away and any other loose articles: Medium riskFailed fuse, resulting in short circuit through sewing machine (via faulty insulation or outdated design): Make sure equipment is tested and safe: Low risk
