Because it thinks it is going to be attacked. let it smell your hand from outside the cage before you put in the cage
To determine the right and left valves of the clam, put the valve in your hand with the nacre facing you and the beak pointing up. If the beak is toward the right, it is the left valve, and if it is toward the left, it is the right valve.
put your hand inside your bathing suit(before you put it on) and hold it up to the light...if you see your hand ...it is see through
That is the handles, screws, face plate and everything except the rough in valve. The rough in is the main body of the valve that is installed in the wall before drywalling or putting the tub/shower in. The trim is put on after the walls are finished.
good vid on this on youtube, remove valve cover turn engine by hand till one valve is open"spring compressed, then adjust the valve at rest to .004, repeat on other valve, put a thin coating of rtv silicone on cover and reinstall,
they have to get something and put it in a hand and see who has the ball first?
Put Your Hand in the Hand was created in 1970.
Hand signal: put your arm straight out of your left hand window and fix the light before a cop sees it
The cotton seeds would be put in and it was turned by hand. This would then pull the cotton from the seeds much quicker and cleaner then before when it was all done by hand.
valve oil
It will only work properly if you put it very close to the foot valve. In which case you may as well replace the foot valve - it's not difficult to do. If you put it at or near the pump, the pump will just suck air.
Many people put a thimble on their thumb before they sew. This makes it easier to push a needle through thick fabrics. They only use the thimble for sewign by hand.