shut up , if u ask that it is just weird : ( Kreep !
doping concentration,temperature are the major source of reverse current
There are two diode ratings. One is the forward current rating, and the other is the reverse breakdown voltage rating. The forward current rating is the maximum current that the diode can conduct before failing, and the reverse breakdown voltage rating is the maximum reverse voltage that can be applied before failing. Of course, the reverse voltage rating has a different meaning in a zener diode, but this answer applies to ordinary diodes.
Forward Resistance:def: It is resistance offered by diode to the forward bias is known as forward resistance.This resistance is not the same for the flow of DC as for the changing current. Accordingly this resistance is of two types :1. DC FORWARD RESISTANCE.2. AC FORWARD RESISTANCE.1. DC forward resistance: It is the opposition by diode to the DC. It is measured by the ratio of DC voltages across the diode to the resulting DC current through it.2. AC forward resistance: It is the opposition offered by the diode to the changing current. It is measured by the ratio of change in voltage across diodes to the resulting change in current through diode. The AC forward resistance is more significant as the diodes are generally used with alternating voltage.Reverse Resistance:def: The resistance offered by the diode to the reverse bias is known as Reverse Resistance. It can be DC reverse resistance or AC reverse resistance depending upon whether the reverse bias is direct or changing voltage. Idealy the reverse resistance of a diode is infinte however in practice the reverse resistance is not infinite because for any value of reverse bias, there does exist a small leakage current. It may be emphasized their that reverse resistance is very large compared to the forward resistance.These Definitions are from PRINCIPLES OF ELECTRONICS by V.K MEHTA and ROHIT MEHTA
A diode is a one-way gate for electrical current to flow through. You must have the right size diode for the amount of current that will be used in your circuit. The stripe on the diode is your output end. That is, the current must enter your diode at the non-stripe end and leave at the end with the stripe. This coincides with the diode symbol used on your schematic. If your diode is in backwards, the circuit will not work as the gate in the diode will block the current just the way it should.
yes... this is possible if a diode i connected in reverse bias with a battery and a resistor for example. A diode in reverse bias means its anode will be connected to positive terminal of the battery and its cathode to the negative terminal of the battery. In such a case, minimal current flows through the circuit which can be neglected.
When a diode is operated as reverse bias the current flow is almost completely blocked. A small amount of current is still able to travel in reverse through the diode and this is referred to as the reverse current saturation.
the current which has negative value n passes through the diode is called as diode reverse current
The leakage current of a (zener) diode is the current that leaks when a diode is connected in reverse biased.
The leakage current of a (zener) diode is the current that leaks when a diode is connected in reverse biased.
A diode is an electronic component with the characteristic that its resistance is not constant, but depends on the magnitude of the current through it. An ideal diode has zero resistance to current in one direction, and infinite resistance to current in the reverse direction.
A specific amount of current is allowed to flow through a diode. If the current passing through the diode exceeds this specific value, the diode gets heated and is likely to be damaged. Therefore, in the biasing circuit of a resistance which limits the current passing through the diode within its specific value is called Forward biased diode. ANSWER: A forward bias diode is just a diode that it is conducting in the forward direction. Positive to anode and negative to cathode
Reverse saturation current of germanium diodeThe current that exists under reverse bias conditions is called the reverse saturation current. Reverse saturation current of the germanium diode is typically 1 micro ampere or 10-6 a.At a fixed temperature, the reverse saturation current of a diode increases with increase in applied reverse bias. In reverse bias region the reverse saturation current also varies with the temperature.
diode current flows only when the diode is forward biased because in reverse bias the barrier potential increases. Diode can conduct in reverse bias if applied votage is high enough to overcome the reverse bias barrier potential but it can be destructive.
A diode is a semiconductor material which has p region and n region. In order to "turn on" and conduct current in the forward direction, a diode requires a certain amount of positive voltage to be applied across it. An ideal diode conducts only when the diode is forward biased, and then the voltage drop across the diode (Vd) is zero. When the ideal diode is reverse biased, no current flows. The two conditions to operate a diode are: (a) Current flow is permitted; the diode is forward biased. (b) Current flow is prohibited; the diode is reversed biased. When the polarity of the battery is such that current is allowed to flow through the diode, the diode is said to be forward-biased.
A: They are both diodes. The difference lies in the application. A rectifier is used to rectify AC current into pulsating current. The zener diode is used to regulate a voltage source to the zener voltage when connected in the reverse direction. ************************************************************** If you look at the characteristic curves of a rectifier diode and a zener diode, you will see that they are similar, but the reverse curve of the zener has a much sharper bend at what is called the "knee". It is at this point on the zener's curve at which it operates.
A specified amount of current is allowed to flow through the diode. if the current passing through the diode exceeds the specific value, the diode gets heated and is likely to be damaged. therefore in a biasing circuit a resistance R has been applied , which limits the current passing through the diode within a specific value.
doping concentration,temperature are the major source of reverse current