Strength and cost.
The concrete would be weaker, and more prone to cracking.
The amount of steel required in concrete as reinforcement is measured using a formula that calculates the amount of pressure that will be put on the concrete. There are different formulas to identify the minimum and the maximum amount of needed steel, depending on if you are making a beam, slab, or column.
structual steel is the widw flange column's and beam's as well as plate steel angle iron ect.. it falls under aws D1.1 welding code. reinforcement steel/reinforcing steel is the rebar, dba,(deformed bar anchor), hsa, (headed stud anchor) that is placed in concrete, floors, walls, footings, ect... it falls under aws D1.4 welding code
100 TONS
Concrete is composed of cement and other cementitious materials such as fly ash and slag cement, coarse aggregate made of crushed stone, fine aggregate such as sand, water, and chemical admixtures. In reinforced concrete, steel is introduced in to the concrete. In plain concrete, no steel reinforcement is introduced. Generally tensile and compressive strength is taken by reinforced concrete and only compressive strength is taken by plain concrete
Reinforcement
to support the concrete
The reinforcement may be in the form of "mesh" or rods. The steel reinforcing rods are colloquially called rebar(reinforcement bars).
strength versus cost of steel against otehr metals
Under reinforcement is safe because in this case steel fails before concrete.
The concrete would be weaker, and more prone to cracking.
concrete in very good in compression,but its capacity to withstand tension forces are comparatively very weak. steel is very good to withstand tensile forces,thats why we provide reinforcement in concrete.And the installation of reinforcement is such a way that it comes at those part of concrete where tension is maximum. second point must be consider that both matterial thermal expansivity is same. other wise we could use other metal
Items used to reinforce concrete are wire mesh, rebar, and steel cables.
The amount of steel required in concrete as reinforcement is measured using a formula that calculates the amount of pressure that will be put on the concrete. There are different formulas to identify the minimum and the maximum amount of needed steel, depending on if you are making a beam, slab, or column.
It proves shear reinforcement in the beam.
A common characteristic of reinforced concrete bridges is that they feature a combination of concrete and steel reinforcement to provide added strength and durability. The steel reinforcement helps to enhance the tensile strength of the concrete, allowing the bridge to better withstand forces like tension and bending.
RCC means reinforced cement concrete....in this case the reinforcement used is steel bars.....the purpose of using the steel bars in concrete it gives tensile strength to concrete to some extent.